605548
13
Zoom out
Zoom in
Previous page
1/49
Next page
12
Fitness Networking
The two interchangeable type RJ45 networking ports (D) are located on the back of the
display console. These network ports, located behind the display console rear access
door, allow the treadmill to be connected to a fitness entertainment system and / or fit-
ness network such as FitLinxx®.
Networking: The built-in networking ports allow the unit to exchange workout
information with a fitness network database.
Fitness Entertainment: The network connection enables the console to power a
third-party receiver for use with a service such as the Cardio Theater® entertain-
ment system or the BroadcastVision™ entertainment system.
Power Cord Routing
The power cord can be run straight from the treadmill, shortened and exited out the user-front left side, or run under
the frame using the power cord clips and exited out the user right-rear side of the treadmill. For efficient cord manage-
ment, the following routing options are recommended:
With the power cord unplugged, insert the clips in the appropriate holes. See the illustration below. Use Hole Pattern 1
or 2 to locate the clips and secure the power cord with the clips, taking up any slack between clips.
NOTE: It may be necessary to tip the treadmill to route the power cord properly.
To plug the power cord into an outlet in front of the treadmill, use Hole Pattern 1 for outlets located at the front of the
machine.
NOTE: To accommodate treadmill incline, at least two feet (24”) of power cord is required between the outlet and the
last power cord clip for outlets in front of the treadmill.
To plug the power cord into an outlet in rear of the treadmill, use Hole Pattern 2 for outlets located at the rear of the
machine.
WARNING: Make sure that there is a 6.5 foot
clearance behind the treadmill. Contact Life Fitness Customer Ser-
vices for an optional longer power cord if necessary.
WARNING: Insure that the power cord (A)
does not contact the striding belt or get pinched between the
frame (C), lift arm (B) or the wheel. Failure to follow this warning
may result in serious injury.
AVERTISSEMENT : S’assurer que
le cordon d’alimentation n’entre pas en contact avec le tapis et ne
soit pas pincé entre le cadre, le bras de levage ou la roue. Le non-
respect de cet avertissement peut provoquer de graves blessures
NOTE: When using Pattern 1, it is extremely important to route the power cord
BETWEEN the lift frame and the main frame.
D
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Life Fitness 97Ti at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Life Fitness 97Ti in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Life Fitness 97Ti

Life Fitness 97Ti User Manual - German - 46 pages

Life Fitness 97Ti User Manual - Dutch - 46 pages

Life Fitness 97Ti User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info