805300
21
Zoom out
Zoom in
Previous page
1/56
Next page
Installing pull-out system
Fig. 55 Glass shelf with retaining part
uFit retaining part on glass shelf.
uPush retaining part onto glass shelf as far as it will go.
Fig. 56 Damping mechanism
The damping mechanism is attached to the left rail. (see
Fig. 56) There is no damping mechanism attached to the
right rail.
Fig. 57 Glass shelf with rails and retaining parts
Install rail with damping mechanism:
uPlace rail hooks onto the openings of the left retaining
part. Fig. 57 (1)
uPush rail forwards. Fig. 57 (2)
wRail latches in audibly.
Install rail without damping mechanism:
uPlace rail hooks onto the openings of the right retaining
part. Fig. 57 (1)
uPush rail forwards. Fig. 57 (2)
wRail latches in audibly.
8.2 Defrosting the appliance
8.2.1 Defrosting with NoFrost
Defrosting is performed automatically with the NoFrost
system. The moisture is deposited on the evaporator, is peri‐
odically defrosted and evaporates.
The appliance does not need to be defrosted.
Note
Water droplets may collect on the bottom of the appliance.
When you take the appliance out of operation:
uPlace a towel in front of the appliance to catch any drops
of water that may run out. (see 10 Shutting down)
8.3 Cleaning the appliance
8.3.1 Ready
WARNING
Danger of electric shock!
uRemove the refrigerator connector or interrupt the power
supply.
WARNING
Risk of fire
uDo not damage the refrigeration circuit.
uEmpty the appliance.
uRemove mains connector.
8.3.2 Clean the housing
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.
uDo not use any steam cleaners!
uWipe the housing down with soft, clean cloth. If very
dirty, use lukewarm water with a neutral cleaner. Glass
surfaces can also be cleaned with glass cleaner.
8.3.3 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
uPlastic surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uMetal surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
8.3.4 Clean the components
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
Maintenance
* Depending on model and options 21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr XRFst 5295 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr XRFst 5295 in the language / languages: English as an attachment in your email.

The manual is 11.1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr XRFst 5295

Liebherr XRFst 5295 User Manual - German - 58 pages

Liebherr XRFst 5295 User Manual - Dutch - 58 pages

Liebherr XRFst 5295 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info