805290
22
Zoom out
Zoom in
Previous page
1/56
Next page
WARNING
Danger of fire
uDo not damage the refrigerant circuit.
uEmpty appliance.
uPull out the power plug.
-or-
uActivate CleaningMode. (see CleaningMode)
8.3.2 Cleaning the housing
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not use steel wool or sponges that scour or scratch.
uDo not use caustic or abrasive cleaning materials or those
containing sand, chloride, or acids.
WARNING
Risk of injury or damage due to hot steam.
Hot steam can cause scalding/burns and damage to surfaces.
uDo not use steam cleaners.
uWipe the housing down with soft, clean cloth. If very dirty,
use lukewarm water with a neutral cleaner. Glass surfaces
can also be cleaned with glass cleaner.
8.3.3 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not use steel wool or sponges that scour or scratch.
uDo not use caustic or abrasive cleaning materials or those
containing sand, chloride, or acids.
uPlastic surfaces: clean by hand with a soft clean cloth, luke-
warm water and a little detergent.
uMetal surfaces: clean by hand with a soft clean cloth, luke-
warm water and a little detergent.
uDrain outlet
Fig. 1 (16)
: Remove any deposits with a thin
item such as a cotton bud.
8.3.4 Cleaning the dry rear panel
You can remove the dry rear panel for cleaning.
Removing the rear panel
uRemove all equipment parts.
Fig. 52
*
uUnscrew the bracket of the water tank with a torx screw-
driver.*
wThe bracket remains attached to the side panel via various
connections and cannot be completely removed.*
Fig. 53
uHold the rear panel with both hands at the bottom and pull it
down forcefully.
uPull the rear panel out to the front by the bottom end.
wThe rear panel has been removed.
If you want to operate the appliance with the rear panel
removed:
uSet the
D-Value
to
D2
. (see D-Value)
Inserting the rear panel
Fig. 54
uMake sure the appliance is completely empty.
uPush in the rear panel from the bottom to the top.
uPress the rear panel forcibly to the back at the left side.
wThe rear panel latches audibly in place.
uScrew on the water tank bracket firmly.*
uInsert the equipment parts.
uSet the
D-Value
to
D1
. (see D-Value)
Maintenance
22 * Depending on model and options
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr XCCsd 5250 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr XCCsd 5250 in the language / languages: English as an attachment in your email.

The manual is 10.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr XCCsd 5250

Liebherr XCCsd 5250 User Manual - German - 60 pages

Liebherr XCCsd 5250 User Manual - Dutch - 60 pages

Liebherr XCCsd 5250 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info