495720
7
Zoom out
Zoom in
Previous page
1/16
Next page
21
EN
Interior light
The interior of the appliance is lit by an LED light strip at the top
of each compartment.
The interior light will always switch on when the appliance door
is opened.
The interior light will go out approx. 5 seconds after the door is
closed.
Press the Light button if you want the interior light to be
on even when the door is closed.
Note
This function applies to the lighting of both compartments.
Furthermore, the brightness of the lighting can be adjusted.
Press the Light button.
Press and hold the Light button
and at the same time press the
temperature setting buttons to in-
crease or decrease the brightness.
Note: The brightness will change in all compartments.
Air exchange with activated charcoal
lter
The way in which wines continue
to mature depends on the ambient
conditions. The quality of the air is
therefore decisive for preserving
the wine.
We recommend that you replace the
illustrated lter once a year. Filters
can be obtained from your dealer.
Changing the lter:
Take the lter by the handle. Turn it
90° to the left or right and remove.
Inserting the lter:
Insert with the handle in a vertical
position. Turn it 90° to the left or right
until it clicks into place.
Safety lock
The lock in the appliance door is
equipped with a safety mechanism.
Locking the appliance:
Insert the key as shown by arrow 1.
Turn the key 180°.
To unlock the appliance, the same
procedure must be repeated in the
same order.
Adjusting the display brightness
Press for 5 seconds. Display =
Display =
Display =
Use buttons Up and Down to select the
desired setting.
h0 = display lighting off
h1 = minimum brightness
h5 = maximum brightness
Display =
Exit setup mode by pressing the On/Off button.
The adjusted brightness will be activated after one minute.
Note
If a button is pressed, the display lights up for one minute at
maximum brightness.
When commissioning the appliance, the adjusted brightness will
only be active once the set interior temperature of the appliance
has been reached.
Setup mode
In set-up mode you can set the child lock and adjust the brightness
of the display. The child lock is designed to protect the appliance
from being switched o and the temperature setting from being
changed accidentally.
Activating the child lock
Press for 5 seconds. Display =
Display =
Display =
Exit setup mode by pressing the On/Off button.
Deactivating the child lock
Press for 5 seconds. Display =
Display =
Display =
Exit setup mode by pressing the On/Off button.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr WTes5972 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr WTes5972 in the language / languages: English as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr WTes5972

Liebherr WTes5972 User Manual - German - 16 pages

Liebherr WTes5972 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info