597671
4
Zoom out
Zoom in
Previous page
1/14
Next page
16
Appliance dimensions
Setting up
Avoid positioning the appliance in direct sunlight or near cookers,
radiators and similar sources of heat.
Standard EN 378 specifies that the room in which you install
your appliance must have a volume of 1 m
3
per 8 g of R 600a
refrigerant used in the appliance, so as to avoid the formation of
inflammable gas/air mixtures in the room where the appliance is
located in the event of a leak in the refriger-
ant circuit. The quantity of refrigerant used in
your appliance is indicated on the type plate
on the inside of the appliance.
Always install the appliance directly against
the wall.
Do not cover ventilation openings
or grille.
Mounting the dust lter
The supplied dust filter prevents that dirt enters
the motor compartment, reducing the refrigeration
performance. Therefore always install the dust filter.
Remove the protective lm from the
dust lter.
Insert the lter a t t he b o t to m and click
into place at the top.
Air circulation in the appliance plinth area
The refrigeration unit is located in the appliance plinth.
To ensure proper air circulation in the plinth area, install the foam
moulding provided as shown in the illustration.
Important
I f t h e f o a m m o u l d in g i s n o t i n s t a ll e d ,
the appliance will not achieve its full
refrigeration performance during
operation.
Mounting the ventilation grille
Fit the provided ventilation grille at the
front and click into place.
Place the appliance in its final position at the place of installation.
Compensate floor unevenness using the
adjustable feet.
Important
The appliance must be aligned horizon-
tally and vertically. If the appliance is not
level, the main body of the appliance can
be deformed and the door will not close
properly.
Levelling the appliance
Turn the spanner clockwise to raise the appliance and anticlock-
wise to lower it.
Position the spanner accordingly.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr UWTes 1672 Vinidor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr UWTes 1672 Vinidor in the language / languages: English as an attachment in your email.

The manual is 4,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr UWTes 1672 Vinidor

Liebherr UWTes 1672 Vinidor User Manual - German - 12 pages

Liebherr UWTes 1672 Vinidor User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info