715458

Liebherr UIKP 1554 Manual

11
Zoom out
Zoom in
Previous page
1/14
Next page
Defect Cause Remedy
Appliance does not
work.
→ The appliance is not switched on. uSwitching on the appliance.
→The power plug is not properly
inserted in the wall socket.
uCheck power plug.
→ The fuse of the wall socket is not in
order.
uCheck fuse.
The compressor
runs for a long
time.
→The compressor switches to a
low speed when little cold is
needed. Although the running time
is increased as a result, energy is
saved.
uThis is normal in energy-saving models.
→ SuperCool is activated. uThe compressor runs for longer in order to rapidly cool
the food. This is normal.
A LED on the
bottom rear of
the appliance (at
the compressor)
flashes repeatedly
every 5 seconds*.
→ There is a fault. uPlease contact the after-sales service (see 6 Mainte‐
nance) .
Excessive noise. →Due to the various speed steps,
speed-regulated* compressors can
generate different running noises.
uThe sound is normal.
A bubbling and
gurgling noise.
→This noise comes from the refrig‐
erant flowing in the refrigeration
circuit.
uThe sound is normal.
A quiet clicking
noise.
→The noise is produced whenever
the refrigeration unit (motor) auto‐
matically switches on or off.
uThe sound is normal.
A hum. It is briefly
a little louder
when the refrig‐
eration unit (the
motor) switches
on.
→The refrigeration increases auto‐
matically when the SuperCool
function is activated, fresh food
has just been placed in the appli‐
ance or the door has been left open
for a while.
uThe sound is normal.
→The ambient temperature is too
high.
uSolution: (see 1.2 Appliance range of use)
A low hum. →The sound is produced by air flow
noise of the fan.
uThe sound is normal.
Vibration noises →The appliance is not standing
firmly on the floor. As a result
objects and adjacent units start
to vibrate when the refrigerator is
running.
uCheck the installation and realign the appliance.
uKeep bottles and jars apart.
Flow sound at the
soft stop mecha‐
nism.
→The noise is produced when the
door is opened and closed.
uThe sound is normal.
The temperature
display indicates:
F0 to F9
→ There is a fault. uPlease contact the after-sales service (see 6 Mainte‐
nance) .
DEMO shines in
the temperature
display.
→ The demo mode is activated. uPlease contact the after-sales service (see 6 Mainte‐
nance) .
The outer surfaces
of the appliance
are warm*.
→The heat of the refrigeration circuit
is used to prevent condensate from
forming.
uThis is normal.
Malfunctions
* Depending on model and options 11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr UIKP 1554 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr UIKP 1554 in the language / languages: English as an attachment in your email.

The manual is 1.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr UIKP 1554

Liebherr UIKP 1554 User Manual - German - 12 pages

Liebherr UIKP 1554 User Manual - Dutch - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info