715454

Liebherr UIKo 1550 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
Fig. 11
uUnscrew the rear adjusting feet using a screwdriver and
undo the front adjusting feet using a no. 8 Allen key alter‐
nately until the unit sits just under the worktop.
uUse a spirit level to level the unit.
wThe gap from the front edge of the cabinet wall to the
appliance should be 41,5 mm on both sides.
wShould there be no unit side wall, align it with the work
top.
For units with door stop components (knobs, sealing
lips etc.):
uDeduct the extra dimension (depth of the door stop
components) from the 41.5 mm depth of insertion.
uUnscrew the rear adjusting feet using a screwdriver and
undo the front adjusting feet using a no. 8 Allen key (if
the adjusting feet are retracted) or a screwdriver (if the
adjusting feet are extended) alternately as far as they
will go. The maximum adjustment range is 60 mm.
wThe appliance is aligned upright.
wThe appliance is slightly braced between the floor and
the work top.
Fig. 12
uPlace the foam pad in the plinth panel – this is essential
for separating air flows!
Fig. 13
uFit the plinth panel (2) without securing.
uPosition the unit door and the unit plinth panel for
testing.
uIf plinth panel (2) is visible, pull it forward until the front
edge of the ventilation grid and the unit plinth panel are
in line.
-or-
uIf the plinth panel (2) is hidden, push it right back.
uEnsure that the ventilation slots are completely free: If
necessary, cut some off the height of the unit plinth
panel (U).
wAdjust the bar height (V) under the plinth panel (2) along
the recess width (W).
Fig. 14
uFit and secure the plinth panel: Hold the plinth panel and
insert the catch.
uFix the unit plinth panel.
To secure appliance in the recess:
Fig. 15
uIf affixing the unit under a worktop, use 2 screws to
secure the fixing bracket under the worktop.
Putting into operation
8 * Depending on model and options
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr UIKo 1550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr UIKo 1550 in the language / languages: English as an attachment in your email.

The manual is 3.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr UIKo 1550

Liebherr UIKo 1550 User Manual - German - 18 pages

Liebherr UIKo 1550 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info