805397
8
Zoom out
Zoom in
Previous page
1/20
Next page
Set a new value: Press Confirm Fig. 5 (2) to select an
active value Fig. 6 (1).
Back to the menu: Press Confirm Fig. 5 (2) to select the
active value Fig. 6 (2).
6.1.4 Display symbols
Display symbols provide information on the current appli‐
ance status:
Symbol Appliance status
Standby
The appliance or temperature zone
is switched off.
Flashing number
Appliance is working. Temperature
flashes until the set value is
reached.
Flashing symbol
Appliance is working. Setting is
made.
Bar grows steadily
Function is activated.
6.2 Control concept
6.2.1 Activating/deactivating the function
You can activate/deactivate the following functions:
Symbol Function
PowerCoolx
SuperFrostx
PartyModex
E-Saver
x When function is on, the appliance works harder. This
means appliance noise when operating may be louder for
a short while, and more energy will be consumed.
uPress the navigation arrows Fig. 5 (1) repeatedly until the
function is displayed.
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus appears in the menu.
wFunction is on/off.
6.2.2 Selecting function value
With the following functions you can set a value in the
submenu:
Symbol Function
Setting the temperature
Switch the appliance on/off
uTap the navigation arrows Fig. 5 (1) repeatedly until the
function is displayed.
uPress Confirm Fig. 5 (2).
uSelect the setting value with the navigation arrows
Fig. 5 (1).
Setting the temperature
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus: On Fig. 6 (1) appears briefly in the submenu
Fig. 7 (4).
wDisplay switches back to the menu.
6.2.3 Activating/deactivating settings
You can activate/deactivate the following settings:
Symbol Setting
WiFi1
Entry lock2
SabbathMode2
Reset2
Switch off 2
uTap the navigation arrows Fig. 5 (1) repeatedly until the
settings appear.
uPress Confirm Fig. 5 (2).
uTap the navigation arrows Fig. 5 (1) repeatedly until the
desired setting is displayed.
1 Activate setting (shortpress)
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus appears in the menu.
wSetting is on / off.
2 Activate setting (longpress)
uTo Confirm Fig. 5 (2), press for 3 seconds.
wYou hear the confirmation tone.
wStatus appears in the menu.
wDisplay changes.
6.2.4 Selecting the setting value
With the following settings you can set a value in the
submenu:
Symbol Settings
Brightness
Door alarm
uTap the navigation arrows Fig. 5 (1) repeatedly until
settings appears.
uPress Confirm Fig. 5 (2).
uTap the navigation arrows Fig. 5 (1) repeatedly until the
desired setting is displayed.
uPress Confirm Fig. 5 (2).
uSelect the setting value with the navigation arrows
Fig. 5 (1).
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus appears briefly in the submenu.
wDisplay switches back to the menu.
6.2.5 Go to the Customer menu
You can see the following settings in the Customer menu:
Controls
8 * Depending on model and options
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SIFNf 5108 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SIFNf 5108 in the language / languages: English as an attachment in your email.

The manual is 3.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SIFNf 5108

Liebherr SIFNf 5108 User Manual - German - 20 pages

Liebherr SIFNf 5108 User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info