805381
13
Zoom out
Zoom in
Previous page
1/18
Next page
8.2.2 Installing pull-out system
Fig. 18 Comparing attachments
There are two different attachments in the appliance. The
attachment above the lowest drawer Fig. 18 (2) has a three-
cornered edge. All other attachments Fig. 18 (1) have a
straight edge.
uFit attachment Fig. 18 (2) with the three-cornered edge
above the lowest drawer.
uFit attachment Fig. 18 (1) with straight edge in all other
positions.
Fig. 19 Attachment on the right moulded rib
uPosition attachment on moulded rib at the front.
Fig. 19 (1)
uPress on attachment at the back. Fig. 19 (2)
8.3 Defrosting the appliance
WARNING
Improper defrosting of the appliance!
Injuries and damage.
uDo not use mechanical equipment or other methods to
speed up the defrosting process other than those recom‐
mended by the manufacturer.
uDo not use electrical heating or steam-cleaning appli‐
ances, naked flames or defroster sprays to defrost.
uDo not use sharp objects to remove ice.
Defrosting is performed automatically. The water from the
thawing process drains through the outlet and evaporates.
Water drops or a thin layer of frost or ice can form on the
back wall; this is a completely normal part of the applian‐
ce’s function. This must not be removed.
uClean the drain opening regularly (see 8.4 Cleaning the
appliance) .
8.4 Cleaning the appliance
8.4.1 Ready
WARNING
Danger of electric shock!
uRemove the refrigerator connector or interrupt the power
supply.
WARNING
Risk of fire
uDo not damage the refrigeration circuit.
uEmpty the appliance.
uRemove mains connector.
-or-
uActivate CleaningMode. (see CleaningMode)
8.4.2 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
uPlastic surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uMetal surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uDrain outlet Fig. 1 (3): remove any deposits with a thin
item such as a cotton bud.
8.4.3 Clean the components
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
Clean with a soft, clean cloth, lukewarm water and some
detergent:
- Drawer
uTo disassemble components: see the relevant section.
uClean the components.
8.4.4 After cleaning
uWipe the appliance and the components dry.
uConnect and switch on the appliance.
The temperature is cold enough:
uPlace the food inside.
uRepeat cleaning regularly.
Maintenance
* Depending on model and options 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SIBa 3950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SIBa 3950 in the language / languages: English as an attachment in your email.

The manual is 4.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SIBa 3950

Liebherr SIBa 3950 User Manual - German - 18 pages

Liebherr SIBa 3950 User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info