805288
18
Zoom out
Zoom in
Previous page
1/26
Next page
uTo make a high number of ice cubes: Activate the MaxIce
function (see 6.2 Control concept) .
uDistribute the ice cubes evenly in the drawer to increase
the capacity.
uClosing the drawer: IceMaker starts making ice cubes
again automatically.
Note
When a certain level is reached in the IceMaker drawer, it
stops producing ice cubes. The IceMaker does not fill the
drawer all the way to the top.
7.6 VarioSpace
Fig. 39
You can remove drawers and glass panels from your appli‐
ance. This provides more room for large food items such as
poultry, joints of meat, large game, and tall baked products.
You can then freeze these items whole for later preparation.
uNote the weight limits on the drawers and glass panels
(see 9.1 Technical specifications) .
7.7 Accessories
7.7.1 Freezer pack*
Freezer packs prevent the temperature rising too quickly
should there be a power cut.
The freezer packs are in the drawer.
You can store the freezer packs in the freezer tray.*
Using the freezer pack
Fig. 40
When the freezer packs are fully frozen:
uPlace on the frozen goods in the top, front part of the
freezer.
8 Maintenance
8.1 Disassembling / assembling pull-
out systems
8.1.1 Notes on disassembly
You can disassemble some of the pull-out systems for
cleaning. Your appliance can contain a variety of pull-out
systems.
The following pull-out systems can be disassembled or
cannot be disassembled:
Pull-out system can be disassembled /
cannot be disassembled
Top tilting
drawer*
cannot be disassembled*
Drawer on
moulded rib
can be disassembled (see 8.1.2 Drawer
on moulded rib)
Bottom drawer cannot be disassembled
IceTower* can be disassembled
(see 8.1.3 IceTower*) *
8.1.2 Drawer on moulded rib
Disassembling pull-out system
Make sure the following prerequisites are met:
qDrawer has been removed. (see 7.1.2 Drawer on moulded
rib)
Fig. 41 Attachment on the right moulded rib
uGrab attachment at the back from below.
uPull off attachment at the back sideways. Fig. 41 (1)
uPull off attachment at the front sideways. Fig. 41 (2)
Installing pull-out system
Fig. 42 Attachment on the right moulded rib
uPosition attachment on moulded rib at the front.
Fig. 42 (1)
uPress on attachment at the back. Fig. 42 (2)
8.1.3 IceTower*
Disassembling pull-out system
Make sure the following prerequisites are met:
qIceTower has been removed. (see 7.2 Pull-out board with
IceTower*)
qGlass shelf has been removed. (see 7.3 Glass shelves)
uPlace pull-out board on a table.
wYou are able to remove the rails more easily from the
glass shelf.
Maintenance
18 * Depending on model and options
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SFNsfe 5247 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SFNsfe 5247 in the language / languages: English as an attachment in your email.

The manual is 6.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SFNsfe 5247

Liebherr SFNsfe 5247 User Manual - German - 24 pages

Liebherr SFNsfe 5247 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info