805288
10
Zoom out
Zoom in
Previous page
1/26
Next page
Switching off the entire appliance
Fig. 8
uTurning off the IceMaker .*
uActivating/deactivating (see 6.2 Control concept) .
wOff: Display goes black.
WiFi
Use this function to connect your appliance to the WiFi. You
can then operate it via the SmartDevice app on a mobile
device. You can also use this function to disconnect or reset
the WiFi connection. To connect your appliance to the WiFi,
you need the SmartDeviceBox. For more information about
the SmartDeviceBox and how to use the SmartDevice app:
(see 1.3 SmartDevice)
Note
You cannot use the SmartDeviceBox in the following coun‐
tries: Belarus, Kazakhstan, Russia. The SmartDevice func‐
tion is not available.
Establishing a WiFi connection
Make sure that the following requirements are fulfilled:
qYou have purchased and inserted a SmartDeviceBox.
(see 1.3 SmartDevice)
qYou have installed the SmartDevice app (see
apps.home.liebherr.com).
Fig. 9
uActivate the setting. (see 6.2 Control concept)
wConnection is established: Status: activated Fig. 6 (1) and
WiFi connecting appears. The symbol flashes.
wConnection is established: Status: activated Fig. 6 (1)
appears.
wConnection failed: Status and Connect appear. The
symbol is permanently visible.
Disconnecting from the WiFi
uDeactivate the setting. (see 6.2 Control concept)
Fig. 10
w
There is no connection: Symbol is permanently
visible.
Resetting the WiFi connection
uReset settings. (see 6.2 Control concept)
Fig. 11
wThe connection and other settings are reset to the
factory settings.
Temperature
The temperature depends on the following factors:
-The amount of times the door is opened
-How long the door is open for
-The room temperature of the installation site
-The type, temperature and amount of food
Freezer compartment Recommended setting
-18 °C
Setting the temperature
Fig. 12
uSet the value. (see 6.2 Control concept) .
wSet temperature is shown at the bottom right of the
display.
Controls
10 * Depending on model and options
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SFNsfe 5247 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SFNsfe 5247 in the language / languages: English as an attachment in your email.

The manual is 6.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr SFNsfe 5247

Liebherr SFNsfe 5247 User Manual - German - 24 pages

Liebherr SFNsfe 5247 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info