719386
9
Zoom out
Zoom in
Previous page
1/24
Next page
Fig. 12
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Carefully remove the protective cover.
Fig. 12 (1)
u
Undo the bolt a little with a T15 screwdriver.
Fig. 12 (2)
u
Hold the door and remove the bolts with your fingers.
Fig. 12 (3)
u
Pull the bearing bush out of the guide. Insert from the other
side and click into place.
Fig. 12 (4)
u
Lift the door and set it aside.
u
Carefully lift the plugs out of the door bearing bush with a
slotted screwdriver and remove.
Fig. 12 (5)
4.3.3 Moving the upper bearing parts to the
other side
Fig. 13
u
Remove both screws with the T25 screwdriver.
u
Lift and remove the bearing bracket.
Fig. 14
u
Release the cover and remove from the side.
Fig. 14 (1)
u
Rotate the cover 180° and clip onto the other side from the
right.
Fig. 14 (2)
u
Click the cover into place.
Fig. 14 (3)
u
Position the screw with a T25 screwdriver.
Fig. 14 (4)
u
Position the upper bearing bracket.
Fig. 14 (5)
w
Place the pins in the provided screw holes.
u
Tighten the screw.
Fig. 14 (4)
u
Insert the screw with a T25 screwdriver and tighten.
Fig. 14 (6)
Putting into operation
* Depending on model and options 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr SBSes 8483 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr SBSes 8483 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info