804852

Liebherr RBstd 528i Manual

12
Zoom out
Zoom in
Previous page
1/14
Next page
A quiet clicking noise.
→The noise is produced whenever the refrigeration unit
(motor) automatically switches on or off.
uThe sound is normal.
A hum. It is briefly a little louder when the refrigeration
unit (the motor) switches on.
→The refrigeration increases automatically when fresh food
has just been placed in the appliance or the door has been
left open for a while.
uThe sound is normal.
→The ambient temperature is too high.
uSolution: (see 1.2 Appliance range of use)
Vibration noises
→The appliance is not standing firmly on the floor. As a result
objects and adjacent units start to vibrate when the refriger-
ator is running.
uAlign the appliance using the adjustable feet.
uKeep bottles and jars apart.
The outer surfaces of the appliance are warm*.
→The heat of the refrigeration circuit is used to prevent
condensate from forming.
uThis is normal.
The temperature is not cold enough.
→The door of the appliance is not properly closed.
uClose the door of the appliance.
→Insufficient ventilation.
uKeep ventilation grille clear, and clean it.
→The ambient temperature is too high.
uSolution: (see 1.2 Appliance range of use) .
→The appliance was opened too frequently or for too long.
uWait to see whether the appliance reaches the required
temperature by itself. If not, please contact the after sales
service (see 6 Maintenance) .
→The appliance is too close to a source of heat (stove, heater
etc).
uChange the position of the appliance or the source of heat.
The internal light does not come on.
→The appliance is not switched on.
uSwitch the appliance on.
→The lamp (if the model comes with an LED lamp) is faulty.
WARNING
Risk of injury from LED light!
The light intensity of the LED lighting corresponds to risk group
RG 2.
If the cover is removed:
uDo not look directly into the light at close quarters through
optical lenses. Doing so may damage your eyes.
uChange the lamp (see 6 Maintenance) .
With an ambient temperature below 15 °C the device is
slightly warmed in places on the inner surface of the
fridge compartment's right side wall.
→This is a necessary part of the function.
uThis is normal.
8 Decommissioning
8.1 Switching off the appliance
uTurn temperature control
Fig. 3 (1)
to 0.
8.2 Taking the appliance out of service
uEmpty the appliance.
uSwitch off the appliance (see 8 Decommissioning) .
uRemove mains connector.
uClean the appliance (see 6.2 Cleaning the appli-
ance) .
uLeave the door open to prevent odour.
9 Disposal
9 Preparing appliance for
disposal
Liebherr uses batteries in some of its appliances.
In the EU, for environmental reasons, legislation
obliges the end user to remove these batteries
before disposing of old appliances. If your appli-
ance contains batteries, a corresponding notice is
attached.
Lamps If you can remove the lamps yourself without
destroying them, also remove these before
disposal.
uTake the appliance out of operation. (see 8.2 Taking the
appliance out of service)
uAppliances with batteries: remove the batteries. For descrip-
tion, see Maintenance chapter.
uIf possible: remove lamps without destroying them.
9 Disposing of the appliance in an
environmentally friendly manner
The appliance still contains
valuable materials and must
be disposed of separately from
unsorted municipal waste.
Dispose of batteries separately
from the old appliance. To do this,
you can return the batteries free
of charge to retailers as well as
recycling centres and collection
centres for recyclable materials.
Lamps Dispose of removed lamps via the
respective collection systems.
For Germany: You can dispose of the appli-
ance free of charge via the
class 1 collection containers at
the local recycling and recyclable
material collection centres. When
purchasing a new fridge/freezer, if
the sales area > 400 m2, retailers
will also take back the old appli-
ance free of charge.
WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly,
but also flammable. The oil contained in the appliance is flam-
mable. Escaping coolant and oil can ignite if the concentration
is high enough and in contact with an external heat source.
uDo not damage the pipelines of the coolant circuit and the
compressor.
Decommissioning
12 * Depending on model and options
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr RBstd 528i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr RBstd 528i in the language / languages: English as an attachment in your email.

The manual is 6.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr RBstd 528i

Liebherr RBstd 528i User Manual - German - 30 pages

Liebherr RBstd 528i User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info