804844
5
Zoom out
Zoom in
Previous page
1/14
Next page
17
EN
(1) Temperature display (display)
(2) Temperature setting buttons
(3) Audible warning on/off button
(4) Child lock activated symbol
(5) On/Off button
(6) Fan button
Operating and control elements
Switching the appliance on and o
Switching the appliance on
Press the On/O button until the temperature display
lights up.
Switching the appliance o
Keep the On/O button pressed for approx. 3 seconds so that
the temperature display goes out.
Note
If the On/Obutton is held down for a further 3 seconds after
the temperature display has gone out, the appliance is switched
on again.
Temperature alarm
If the temperatures in the interior are out of the permitted range,
the audible warning signal will sound and the temperature display
will ash.
After a lengthy power failure, the temperature in the interior may
have risen to too high a level. After the power supply returns, the
fall in temperature can be watched on the display.
Cancel the audible warning signal by pressing the Alarm button.
The temperature display will stop ashing as soon as the tem-
perature in the interior has reached the set value.
Door open alarm
If the door is left open for more than 180 seconds, the audible
warning signal will sound.
If the door must be opened for a lengthy period to place
items into the appliance, cancel the audible warning signal
by pressing the Alarm button.
The alarm switches back to standby when the door is shut.
Setting the temperature
To increase the temperature
Press the Up button.
To reduce the temperature
Press the Down button.
- When pressing one of the buttons for the first time, the display
will start to flash.
- Pressing this button again enables you to change the temperature
setting.
- The electronic controls will switch over automatically about
5 seconds after the last time you pressed the button, and the
actual temperature will be displayed.
Note
The temperature in the warmest area of the interior may be higher
than the temperature setting.
If the door is left open for a lengthy period, the temperature in the
appliance's compartments may rise dramatically.
Setup mode
In setup mode, you can set the child lock and adjust the bright-
ness of the display.
The child lock is designed to protect the appliance from being
switched o accidentally.
Activating the child lock
Press for 5 seconds. Display =
Press Display =
Press Display =
Press Display =
Press The child lock is activated.
Deactivating the child lock
Press for 5 seconds. Display =
Press Display =
Press Display =
Press Display =
Press The child lock is deactivated.
Adjusting the display brightness
for 5 seconds. Display =
Display =
Display =
Use buttons Up and Down to select the desired setting.
h1 = minimum brightness
h5 = maximum brightness
Display =
Display =
The adjusted brightness will be activated after one minute.
Note
If a button is pressed, the display lights up for one minute at
maximum brightness.
When commissioning the appliance, the adjusted brightness will
only be active once the set interior temperature of the appliance
has been reached.
Temperature alarm after a fault in the appliance
If the appliance develops a fault, the temperature in the interior
may rise too high or fall too low. The audible warning signal will
sound and the temperature display will ash.
If the temperature displayed is too high (warm), rst check whether
the door is closed correctly.
If the temperature display continues to show a value that is too high
or too low after one hour, contact the customer service department.
Cancel the audible warning signal by pressing the Alarm button.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr OKes 1750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr OKes 1750 in the language / languages: English as an attachment in your email.

The manual is 3.43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr OKes 1750

Liebherr OKes 1750 User Manual - German - 14 pages

Liebherr OKes 1750 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info