710390
13
Zoom out
Zoom in
Previous page
1/22
Next page
- De contactdoos bevindt zich buiten het bereik van de
achterzijde van het apparaat in het desbetreffende gedeelte
Fig. 22 (a, b, c)
.
u
Elektrische aansluiting controleren.
u
Breng de apparaatstekker
Fig. 22 (G)
aan de achterzijde
van het apparaat aan. Let op het correct vastklikken.
u
De netstekker op de voeding aansluiten.
w
Het logo van Liebherr verschijnt op het beeldscherm.
w
De weergave verandert in het stand-bysymbool.
4.7 Apparaat inschakelen
Aanwijzing
Is de demonstratiemodus geactiveerd, verschijnt DEMO op het
homebeeldscherm.
u
Demonstratiemodus deactiveren (zie 7) .
Apparaat ca. 2 uur vóór de eerste lading aansluiten en inscha-
kelen.
4.7.1 Apparaat inschakelen
Wordt het stand-bysymbool boven het volledige beeld-
scherm weergegeven:
u
Druk op het stand-bysymbool.
w
Het apparaat is ingeschakeld. De weergave wisselt naar het
homebeeldscherm.
w
Het apparaat stelt zich op de weergegeven temperatuur in.
Dit wordt door de pijlen omlaag weergegeven.
Wordt het stand-bysymbool wordt in het veld koelge-
deelte weergegeven:
u
Druk op het stand-bysymbool.
w
Het apparaat is ingeschakeld.
w
Het apparaat stelt zich op de weergegeven temperatuur in.
Dit wordt door de pijlen omlaag weergegeven.
Is het beeldscherm zwart:
u
Druk op het beeldscherm.
w
Het stand-bysymbool verschijnt op het volledige beeld-
scherm.
u
Druk op het stand-bysymbool.
w
Het apparaat is ingeschakeld. De weergave wisselt naar het
homebeeldscherm.
w
Het apparaat stelt zich op de weergegeven temperatuur in.
Dit wordt door de pijlen omlaag weergegeven.
4.8 SmartDeviceBox
SmartDeviceBox : Handleiding over de inge-
bruikname: www.smartdevice.liebherr.com/install
Wordt de SmartDeviceBox (SDB) correct toegepast,
verschijnt het hieronder weergegeven menu. Het apparaat
wordt met ingeschakelde WLAN geleverd.
Open het menu WIFI om
meerdere wifi-functies op te
roepen.
Fig. 23
u
Druk op WIFI.
w
Het menu WIFI wordt geopend.
Wifi in-/uitschakelen
Fig. 24
u
Met de knop rechtsonder in het menu WIFI activeren of
deactiveren
w
Knop op OFF = WIFI is gedeactiveerd.
w
Knop op ON = WIFI is geactiveerd.
WIFI INFO
Status van de SmartDevi-
ceBox oproepen.
Fig. 25
u
Druk op OK.
w
De weergave WIFI INFO wordt geopend.
w
De volgende statussen
kunnen worden weerge-
geven:
Fig. 26
w
SSID: ***WPS*** = De SmartDeviceBox bevindt zich 3 min.
In de WPS-modus. Er kan een automatische verbinding via
de router met de SmartDeviceBox tot stand worden
gebracht.
w
SSID: LHSDB_xxxxxxxxx = de SmartDeviceBox bevindt 30
min. in de handmatige verbindingsmodus. De SmartDe-
viceBox stuurt een eigen netwerk uit waarmee men verbin-
ding kan maken om de WLAN-gegevens over te brengen.
w
SSID: leeg = de SmartDeviceBox bevindt zich in de Sleep-
modus. Voer a.u.b. een WIFI-Reset uit en verbind uw
SmartDeviceBox met het thuisnetwerk
w
SSID: TP-LINK_2D43A2 of Fritz!Box7069 = de SmartDevi-
ceBox is met het thuisnetwerk verbonden.
WIFI RESET
Terugzetten van de Smart-
DeviceBox op de basisin-
stellingen.
Fig. 27
u
Met OK bevestigen.
w
De SmartDeviceBox wordt op de basisinstellingen terug-
gezet.
De statusweergave voor wifi op het homebeeldscherm
Status: WiFi on & connected
Fig. 28
u
De wifi-indicatie is wit.
w
Wifi is ingeschakeld.
w
Er bestaat een succesvolle verbinding tussen het thuisnet-
werk en de server van Liebherr.
Status: WiFi on & connecting
In gebruik nemen
* afhankelijk van model en uitvoering 13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr Kef 3730-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr Kef 3730-20 in the language / languages: Dutch as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr Kef 3730-20

Liebherr Kef 3730-20 User Manual - English - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info