Manual Liebherr K 2834 (page 6 of 16) (English)

804842

Zoom out

Zoom in

1/16

Fig. 4

qBefore you connect the appliance, report any damage

immediately to the delivery company.

qThe floor of the installation site must be horizontal and

even.

qDo not install the appliance in direct sunlight, next to an

oven, radiator or similar.

qInstall the appliance with the rear panel up against the

wall and always use the supplied wall spacers (see

below).

qOnly ever move the appliance when it is empty.

qThe surface supporting the appliance must be at the

same level as the surrounding floor.

qDo not install the appliance on your own.

qThe more refrigerant there is in the appliance, the larger

the space that it is installed in must be. If the space is

too small, any leak may create a flammable mixture of

gas and air. For every 8 g of refrigerant, the installation

space must be at least 1 m3. Information regarding the

coolant can be found on the type plate inside the appli‐

ance.

uDetach the connecting cable from the rear of the appli‐

ance, removing the cable holder at the same time

because otherwise there will be vibratory noise!

uRemove the protective film from the decorative trims.

uRemove all transit supports.

To achieve the specified energy consumption, use the

spacers, which are supplied with some appliances. This

increases the appliance depth by approx. 35 mm. The

appliance will work properly without the spacers but will

consume slightly more energy.

uIf your appliance comes with

wall spacers, mount these on

the back of the appliance,

bottom left and right.

uDispose of packaging material (see 4.5 Disposing of

packaging) .

CAUTION

Risk of injury or damage from the appliance tipping or the

door falling open!

If the additional adjustable foot on the base support is not

correctly positioned on the floor, there is a risk of the door

falling open or the appliance tipping. This can lead to injury

or property damage.

uUnscrew the additional adjustable foot on the support

until it reaches the floor.

uThen turn it another 90°.

uAlign the appliance so that it

stands firmly and on a level

by applying the accompa‐

nying spanner to the adjust‐

able-height feet (A) and

using a spirit level.

uThen support the door:

Extend the adjustable foot

at the turn hinge (B) until it

rests on the floor and then

make a further 90° turn.

Note

uClean the appliance (see 6.2 Cleaning the appliance) .

If the appliance is installed in a very damp environment,

condensate may form on the outside of the appliance.

uAlways see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary.

Ensure that the following tools are to hand:

qTorx 20

qTorx 15

qScrewdriver

qIf necessary, cordless screwdriver

qSecond person for fitting work, if needed

4.3.1 Removing the door

Note

uRemove any food from the door racks before removing

the door, so that no food falls out.

Fig. 5

uRemove the spacer Fig. 5 (13) from under the left-hand

side of the door.

Fig. 6

uPull the cover Fig. 6 (1) forwards and upwards.

uLift off the cover Fig. 6 (2).

Putting into operation

6 * Depending on model and options

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr K 2834 in the language / languages: English as an attachment in your email.

The manual is 2.74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr K 2834

Liebherr K 2834 User Manual - German - 16 pages

Liebherr K 2834 User Manual - Dutch - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr K 2834 Manual

Product: