805605

Liebherr IXRF 5185 Manual

18
Zoom out
Zoom in
Previous page
1/56
Next page
7.3.1 Removing / inserting the glass shelf
under the tilting drawer*
The glass shelf is located under the top tilting drawer.
Make sure that the following requirements are fulfilled:
qDrawer has been removed. (see 7.1.3 Top tilting drawer*)
Removing glass shelf
Fig. 41 Tilting drawer glass shelf
uPush glass shelf upwards from below on both sides. (see
Fig. 297)
uTake out the glass shelf to the front.
Inserting glass shelf
Fig. 42 Tilting drawer glass shelf
uPosition glass shelf at an angle behind the stoppers. (see
Fig. 298)
uLower glass shelf.
uSlide in glass shelf to the back.
wGlass shelf clicks into place.
7.3.2 Removing / inserting the glass shelf
Depending on the equipment, the glass shelf may be
located under the drawer.
Depending on the equipment, the glass shelf may be
located under the IceTower.*
*
Make sure that the following requirements are fulfilled:
qGlass shelf under the drawer: The drawer has been
removed. (see 7.1 Drawers)
qPull-out board under IceTower: IceTower has been
removed. (see 7.2 Pull-out board with IceTower*) *
Removing glass shelf
Fig. 43 Example illustration of glass shelf
uLift glass shelf at the front. Fig. 43 (1)
uTake out glass shelf to the front. Fig. 43 (2)
Inserting glass shelf
Fig. 44 Example illustration of glass shelf
uPosition glass shelf at an angle behind the stoppers. (see
Fig. 300)
uLower glass shelf.
uSlide in glass shelf to the back.
7.4 IceMaker*
The IceMaker will produce ice cubes for household use only.
Ensure that the following conditions are met:
-IceMaker is cleaned (see 8 Maintenance) .
-IceMaker drawer is cleaned.
-IceMaker drawer is fully inserted.
7.4.1 Producing ice cubes
The volume depends on the freezing temperature. The
colder the temperature, the more ice cubes the system can
produce in a certain time period.
After the IceMaker is turned on for the first time, it can take
up to 24 hours for the first ice cubes to be made.
uActivate the IceMaker function (see 6.2 Control concept) .
uTo make a high number of ice cubes: Activate the MaxIce
function (see 6.2 Control concept) .
uDistribute the ice cubes evenly in the drawer to increase
the capacity.
uClosing the drawer: IceMaker starts making ice cubes
again automatically.
Note
When a certain level is reached in the IceMaker drawer, it
stops producing ice cubes. The IceMaker does not fill the
drawer all the way to the top.
Features
18 * Depending on model and options
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IXRF 5185 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IXRF 5185 in the language / languages: English as an attachment in your email.

The manual is 11.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info