805604
53
Zoom out
Zoom in
Previous page
1/56
Next page
Examples:
Activated functions (see 6.3 Functions)
Running fan
Freshly sorted food
High ambient temperature
Door opened for long periods
Noise Possible cause Type of noise
Bubbling and
splashing
Coolant is flowing
into the cooling
circuit.
Normal noise
Spitting and
hissing
Coolant is spraying
into the cooling
circuit.
Normal noise
Humming The appliance
cools. The volume
depends on the
cooling output.
Normal noise
Sipping noises The self-closing
door is being
opened and
closed.
Normal noise
Whirring and
murmuring
The fan is running. Normal operating
noise
Clicking Components are
being switched on
and off.
Normal switching
noise
Noise Possible cause Type of noise
Rattling or
humming
Valves are active. Normal switching
noise
Noise Possible
cause
Type of noise How to
resolve
Vibration Unsuitable
installation
Error noise Check instal‐
lation.
Set up the
appliance.
Clattering Equipment,
Objects
inside the
appliance
Error noise Secure
equipment
parts.
Leave a gap
between
items.
9.3 Technical faults
Your appliance is designed and manufactured for reliable
operation and a long service life. If a malfunction nonethe‐
less occurs during operation, please check whether the
malfunction is due to an operating error. In this case, you
will have to be charged for the costs incurred, even during
the warranty period.
You may be able to rectify the following faults yourself.
9.3.1 Appliance function
Defect Cause Remedy
The appliance does
not work.
The appliance is not switched on. uSwitch on the appliance.
The power plug is not properly
inserted in the wall socket.
uCheck the power plug.
The powerfuse in the wall socket is
not OK.
uCheck the fuse.
Power failure. uKeep the appliance closed.
uProtect your food: Lay freezer packs on top of the food or
use another freezer if the power is off for a prolonged
period.
uDo not re-freeze defrosted food.
The appliance connector is not
correctly inserted in the appliance.
uCheck the appliance connector.
The temperature is
not cold enough
This means that the door of the
appliance is not closed properly
uClose the appliance door
Insufficient ventilation uClear and clean the ventilation grille.
The ambient temperature is too
high
uSolution: (see 1.4 Range of appliance use) .
The appliance was opened too
frequently or for too long
uWait to see whether the required temperature resets
itself by itself. If not, contact Customer Service
(see 9.4 Customer service) .
The temperature is incorrectly set uSet to a colder temperature and check after 24 hours.
The appliance is too near to a heat
source (stove, heater etc).
uChange location of appliance or the heat source.
The appliance was not properly
installed in the recess.
uMake sure the appliance was installed correctly and the
door closes properly.
The door seal is
defective or should
The door seal is interchangeable.
You can replace it without the use
of any special tools.
uContact Customer Service (see 9.4 Customer service) .
Customer support
* Depending on model and options 25
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IXRF 5165 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IXRF 5165 in the language / languages: English as an attachment in your email.

The manual is 11.28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info