805602

Liebherr IXRF 5100 Manual

18
Zoom out
Zoom in
Previous page
1/44
Next page
9.4.1 Contact Customer Services
Make sure you have the following appliance data at the
ready:
qAppliance name (model and index)
qService no. (Service)
qSerial no. (S no.)
uLook up the appliance information on the display
(see Info) .
-or-
uReferring to appliance info on the nameplate
(see 9.5 Model plate) .
uNote down the appliance information.
uNotify Customer Services of the following: Give us the
appliance data.
wThis will help us to provide you with a faster, more accu‐
rate service.
uFollow any further instructions given by Customer Serv‐
ices.
9.5 Model plate
The model plate is behind the drawers on the inside of the
appliance.
Fig. 33
(1) Appliance description (3) Serial no.
(2) Service no.
uNote the data on the model plate.
10 Shutting down
uEmpty the appliance.
uTurn off the appliance .
uRemove mains connector.
uRemove appliance connector if required: Remove and
move from left to right at the same time.
uClean the appliance (see 8.3 Cleaning the appliance) .
uLeave the door open to avoid bad smells building up.
11 Disposal
11.1 Preparing appliance for disposal
Liebherr uses batteries in some of its appli‐
ances. In the EU, for environmental reasons,
legislation obliges the end user to remove
these batteries before disposing of old appli‐
ances. If your appliance contains batteries, a
corresponding notice is attached.
Lamps If you can remove the lamps yourself without
destroying them, also remove these before
disposal.
uTake the appliance out of operation.
uAppliances with batteries: remove the batteries. For
description, see Maintenance chapter.
uIf possible: remove lamps without destroying them.
11.2 Disposing of the appliance in an
environmentally friendly manner
The appliance still contains
valuable materials and must
be disposed of separately from
unsorted municipal waste.
Dispose of batteries separately
from the old appliance. To do
this, you can return the batteries
free of charge to retailers as
well as recycling centres and
collection centres for recyclable
materials.
Lamps Dispose of removed lamps
via the respective collection
systems.
For Germany: You can dispose of the appli‐
ance free of charge via the
class 1 collection containers
at the local recycling and
recyclable material collection
centres. When purchasing a new
fridge/freezer, if the sales area
> 400 m2, retailers will also take
back the old appliance free of
charge.
WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly,
but also flammable. The oil contained in the appliance
is flammable. Escaping coolant and oil can ignite if the
concentration is high enough and in contact with an
external heat source.
uDo not damage the pipelines of the coolant circuit and
the compressor.
uTransport the appliance without damaging it.
uDispose of batteries, lamps and the appliance according
to the above specifications.
Shutting down
18 * Depending on model and options
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IXRF 5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IXRF 5100 in the language / languages: English as an attachment in your email.

The manual is 8.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info