805600

Liebherr IXCC 5155 Manual

24
Zoom out
Zoom in
Previous page
1/64
Next page
Pull-out system can be disassembled /
cannot be disassembled
Partial pull-out fridge
compartment*
cannot be disassembled*
Partial pull-out freezer
compartment
can be disassembled
(see 8.2.2.1 Partial pull-out freezer
compartment)
8.2.2 Drawer on telescopic rails
Partial pull-out freezer compartment
Disassembling pull-out system
Make sure the following prerequisites are met:
qDrawer has been removed.
qGlass shelf has been removed. (see 7.9 Glass shelves)
Fig. 71 Glass shelf with rails
uPush up front click-in hooks. Fig. 71 (1)
uMove the pull-out rails to the side Fig. 71 (2) and to the
rear Fig. 71 (3).
Installing pull-out system
Fig. 72 Glass shelf with rails
uHook in rail at the back. Fig. 72 (1)
uHook in rail at the front. Fig. 72 (2)
8.3 Defrosting the appliance
8.3.1 Defrosting the fridge compartment
Defrosting is performed automatically. The water from the
thawing process drains through the outlet and evaporates.
uClean the drain opening regularly (see 8.4 Cleaning the
appliance) .
8.3.2 Defrosting the freezer compartment with
NoFrost
Defrosting is performed automatically with the NoFrost
system. The moisture is deposited on the evaporator, is peri‐
odically defrosted and evaporates.
The appliance does not need to be defrosted.
8.4 Cleaning the appliance
8.4.1 Ready
WARNING
Danger of electric shock!
uRemove the refrigerator connector or interrupt the power
supply.
WARNING
Risk of fire
uDo not damage the refrigeration circuit.
uEmpty the appliance.
uRemove mains connector.
-or-
uActivate CleaningMode. (see CleaningMode)
8.4.2 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
uPlastic surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uMetal surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uDrain hole: remove deposits using a thin item (for
example a cotton bud).
8.4.3 Cleaning the dry rear panel
You can remove the dry rear panel for cleaning.
Removing the rear panel
uRemove all equipment parts.
Fig. 73
uHold the rear panel with both hands at the bottom and
pull downward vigorously at the same time.
uPull the rear panel out to the front by the bottom end.
wThe rear panel has been removed.
If you want to continue operating the appliance with the
rear panel removed:
uSet the D-Value to D2. (see D-Value)
Maintenance
24 * Depending on model and options
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IXCC 5155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IXCC 5155 in the language / languages: English as an attachment in your email.

The manual is 11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info