805366
12
Zoom out
Zoom in
Previous page
1/24
Next page
User Guide
Quality, Design and Innovation
home.liebherr.com/fridge-manuals
Contents
1 Appliance at a glance............................................ 3
1.1 Scope of delivery.......................................................... 3
1.2 Overview of the appliance and its equipment........ 3
1.3 SmartDevice.................................................................. 3
1.4 Appliance range of use............................................... 4
1.5 Conformity..................................................................... 4
1.6 SVHC substances according to REACH regulation. 4
1.7 EPREL database........................................................... 4
2 General safety instructions.................................. 4
3 Putting into operation........................................... 6
3.1 Switching on appliance............................................... 6
3.2 Inserting the components.......................................... 6
4 Foods management............................................... 6
4.1 Storing food.................................................................. 6
4.2 Storage times............................................................... 7
5 Saving energy........................................................ 7
6 Controls................................................................. 7
6.1 Controls and displays.................................................. 7
6.1.1 Status display..............................................................7
6.1.2 Navigation.................................................................... 7
6.1.3 Operating structure....................................................8
6.1.4 Display symbols.......................................................... 8
6.2 Control concept............................................................ 8
6.2.1 Activating/deactivating the function..................... 8
6.2.2 Selecting function value........................................... 8
6.2.3 Activating/deactivating settings.............................9
6.2.4 Selecting the setting value.......................................9
6.2.5 Go to the Customer menu......................................... 9
6.3 Functions....................................................................... 9
Turn off appliance.......................................................9
WiFi.............................................................................. 9
Temperature...............................................................10
SuperCool...................................................................10
PowerCool*................................................................ 10
PartyMode...................................................................11
HolidayMode...............................................................11
SabbathMode............................................................ 11
E-Saver........................................................................ 11
CleaningMode............................................................ 12
Display brightness.................................................... 12
Door alarm..................................................................12
Entry lock....................................................................12
Info...............................................................................12
Reminder.....................................................................12
Reset........................................................................... 13
6.4 Fault messages............................................................ 13
6.4.1 Warnings.................................................................... 13
6.4.2 DemoMode................................................................. 13
7 Features................................................................. 13
7.1 4-star freezer compartment*..................................... 13
7.2 Door rack....................................................................... 13
7.3 Shelves.......................................................................... 14
7.4 Dividing shelf*.............................................................. 14
7.5 VarioSafe*..................................................................... 15
7.6 Space for baking tray*................................................ 15
7.7 Drawers.......................................................................... 15
7.8 EasyFresh-Safe cover.................................................. 16
7.9 Adjusting the moisture levels.................................... 17
7.10 Pull-out board with bottle basket*........................... 17
7.11 Glass shelves*.............................................................. 18
7.12 Accessories................................................................... 18
8 Maintenance.......................................................... 18
8.1 FreshAir carbon filter*................................................. 18
8.2 Disassembling / assembling pull-out systems...... 19
8.3 Defrosting the appliance............................................ 19
8.4 Defrosting the freezer compartment manually*.... 19
8.5 Cleaning the appliance............................................... 20
9 Customer help....................................................... 20
9.1 Technical specifications............................................. 20
9.2 Operating noises.......................................................... 21
9.3 Technical fault.............................................................. 21
9.4 Customer Services....................................................... 22
9.5 Model plate................................................................... 22
10 Shutting down....................................................... 23
11 Disposal................................................................. 23
11.1 Preparing appliance for disposal.............................. 23
11.2 Disposing of the appliance in an environmentally
friendly manner............................................................ 23
The manufacturer is continually working on the further
development of all types and models. Please be aware that
we reserve the right to make changes to the shape, equip‐
ment and technology.
Symbol Explanation
Read instructions
Please read the information in these instruc‐
tions carefully to understand all of the benefits
of your new appliance.
Full instructions on the internet
You can find detailed instructions on the
internet using the QR code on the front
of these instruction or by entering the
service number at home.liebherr.com/fridge-
manuals.
The service number can be found on the serial
tag:
Fig. Example illustration
2 * Depending on model and options
Symbol Explanation
Check appliance
Check all parts for transport damage. If you
have any complaints, please contact your
agent or customer service.
Differences
These instructions apply to a range of models,
so differences are possible. Sections that
apply to certain models only are marked with
an asterisk (*).
Instructions and results
Instructions are marked with a .
Results are marked with a .
Videos
Videos about the appliances are available on
the YouTube channels of Liebherr-Hausgeräte.
These operating instructions apply to:
DRe / f 39.. / 41..
IRDe 51..
IRd / e / f 39.. / 40.. / 41.. / 45.. / 51..
IRSe / f 39.. / 41..
IRe 1784
1 Appliance at a glance
1.1 Scope of delivery
Check all parts for damage during transport. If you have
any complaints, please contact your retailer or Customer
Services (see 9.4 Customer Services) .
Your new appliance comes with the following parts:
-Built-in appliance
-Features (depending on the model)
-Installation materials (depending on the model)
-“Quick Start Guide”
-“Installation Guide
-Service Brochure
1.2 Overview of the appliance and its
equipment
Fig. 1 Example illustration
Temperature range
(A) Fridge section (B) EasyFresh
(C) Coldest zone
Features
(1) Controls (9) EasyFresh-Safe cover
(2) 4-star freezer* (10) EasyFresh-Safe
(3) Fan with FreshAir
active carbon filter*
(11) Drainage outlet
(4) Split shelf* (12) Nameplate
(5) Shelf (13) Vegetable drawer*
(6) VarioSafe* (14) Door rack
(7) Pull-out panel with
bottle basket*
(15) Bottle rack
(8) Space for baking tray*
Note
uShelves, drawers and baskets are arranged for optimum
energy efficiency when the appliance is delivered.
Changing how the shelves, for example, are inserted in
the fridge compartment does not have any impact on
energy consumption.
1.3 SmartDevice
SmartDevice is the networking solution for your refrigerator.
If your appliance SmartDevice-enabled or compatible, you
can quickly and easily connect your appliance to your
WiFi. With the SmartDevice app, you can operate your appli‐
ance from a mobile device. Additional functions and setting
options are available in the SmartDevice SmartDevice app.
SmartDevice-
compatible appli‐
ance:
Your appliance is compatible for use
with the SmartDeviceBox. You must
first purchase and install the Smart‐
DeviceBox. In order to connect your
appliance to the WiFi, you need to
download the SmartDevice app.
Appliance at a glance
* Depending on model and options 3
More information
about SmartDe‐
vice:
smartdevice.liebherr.com
Purchasing the
SmartDeviceBox
in the Liebherr-
Hausgeräte store:
home.liebherr.com/shop/de/deu/
smartdevicebox.html
Downloading the
SmartDevice app:
After installing and configuring the
SmartDevice, you can connect your
appliance to the WiFi using the
SmartDevice app and the WiFi appli‐
ance function (see WiFi) .
Note
You cannot use the SmartDeviceBox in the following coun‐
tries: Belarus, Kazakhstan, Russia. The SmartDevice func‐
tion is not available.
1.4 Appliance range of use
Intended use
The appliance is only suitable for cooling
food products in a domestic or household-like
environment. This includes, for example, use:
-in staff kitchens, bed and breakfast estab‐
lishments,
-by guests in country houses, hotels, motels
and other accommodation,
-for catering and similar services in the
wholesale trade.
The appliance is not suitable for freezing
food;*
All other types of use are not permitted.
Foreseeable misuse
The following applications are expressly
forbidden:
-Storing and refrigerating medicines, blood
plasma, laboratory preparations or similar
substances and products based on the
Medical Device Directive 2007/47/EC
-Use in areas at risk of explosions
Misusing the appliance may lead to damage
to the goods stored or they may spoil.
Climate classifications
Depending on the climate classification the
appliance is designed to operate in restricted
ambient temperatures. The climate classifica‐
tion applying to your appliance is printed on
the rating plate.
Note
uKeep to the specified ambient tempera‐
tures in order to guarantee that the appli‐
ance works properly.
Climate clas‐
sification
for ambient temperatures of
SN 10 °C to 32 °C
N 16 °C to 32 °C
ST 16 °C to 38 °C
T 16 °C to 43 °C
SN-ST 10 °C to 38 °C
SN-T 10 °C to 43 °C
1.5 Conformity
The refrigerant circuit has been tested for leaks. When
installed, the appliance complies with the applicable safety
regulations and with the corresponding directives.
The full text of the EU Declaration of Conformity is available
on the following website: www.Liebherr.com
1.6 SVHC substances according to
REACH regulation
You can check whether your appliance contains SVHC
substances according to REACH regulation at the following
link: home.liebherr.com/de/deu/de/liebherr-erleben/nach‐
haltigkeit/umwelt/scip/scip.html
1.7 EPREL database
Details about energy labelling and ecodesign requirements
will be available on the European product database (EPREL)
from 1st March 2021. You can access the product database
at the following link: https://eprel.ec.europa.eu/ You will be
asked to enter the model ID. You can find the model ID on
the nameplate.
2 General safety instructions
Please keep these operating instructions in a
safe place so you can refer back to them at
any time.
If you pass the appliance on, please hand
these operating instructions to the next user.
Read these operating instructions carefully
before use to ensure safe and correct use of
the appliance. Follow the instructions, safety
instructions and warning messages included
at all times. They are important for ensuring
you can operate and install the appliance
safely and without any problems.
Danger for the user:
-This device can be used by children and
people with impaired physical, sensory or
General safety instructions
4 * Depending on model and options
mental abilities or with a lack of experi‐
ence and knowledge provided that they
are supervised or have received instruction
in the safe use of this device, and about
the resulting hazards. Children must not
play with this appliance. Cleaning and user
maintenance work must not be carried out
by children without adult supervision. Chil‐
dren aged between 3 and 8 are allowed
to load and unload the appliance. Children
below the age of 3 must be kept away from
the appliance unless they are under contin‐
uous adult supervision.
-The socket must be easily accessible so
that the appliance can be disconnected
quickly from the electricity in an emer
gency. It must not be located in the area
behind the appliance.
-When disconnecting the appliance from the
supply, always take hold of the plug. Do not
pull the cable.
-In the event of a fault pull out the mains
plug or deactivate the fuse.
-Do not damage the mains power cable. Do
not operate the appliance with a defective
mains power cable.
-Only customer service or other specially
trained staff may repair or perform other
operations on the appliance.
-Only install, connect and dispose of the
appliance according to the instructions.
-Only use the appliance when is installed.
Fire hazard:
-The coolant used (information on the model
plate) is ecofriendly but also flammable.
Any leaking coolant may ignite.
Do not damage the refrigerant circuit
pipes.
Do not handle ignition sources inside the
appliance.
Do not use electrical appliances inside
the appliance (e.g. steam cleaners,
heaters, ice cream makers, etc.).
If the refrigerant leaks: remove any naked
flames or ignition sources from the
vicinity of the leakage point. Properly air
the room. Inform customer services.
-Do not store explosives or sprays using
combustible propellants such as butane,
propane, pentane, etc. in the appliance. To
identify these spray cans, look for the list
of contents printed on the can, or a flame
symbol. Gases possibly escaping may ignite
due to electrical components.
-Keep burning candles, lamps and other
items with naked flames away from the
appliance so that they do not set the appli‐
ance on fire.
-Please be sure to store alcoholic drinks
or other packaging containing alcohol in
tightly closed containers. Any alcohol that
leaks out may be ignited by electrical
components.
Danger of tipping and falling:
-Do not misuse the plinth, drawers, doors
etc. as a step or for support. This applies
particularly to children.
Danger of food poisoning:
-Do not consume food which has been
stored too long.
Danger of frostbite, numbness and pain:
-Avoid prolonged skin contact with cold
surfaces or refrigerated/frozen goods or
take protective measures, e.g wear gloves.
Danger of injury and damage:
-Hot steam can lead to injury. Do not use
electrical heating or steam cleaning equip‐
ment, open flames or defrosting sprays to
defrost.
-Do not use sharp implements to remove the
ice.
Risk of crushing:
-Do not hold the hinge when opening and
closing the door. Fingers may get caught.
Symbols on the appliance:
This symbol may be located on the
compressor. It relates to the oil in the
compressor and makes reference to the
risk that: Swallowing or inhaling can be
fatal. This advice is only relevant to recy‐
cling. There is no danger in normal opera‐
tion.
This symbol is located on the compressor
and indicates the danger of flammable
materials. Do not remove the sticker.
This or a similar sticker may be located
on the rear of the appliance. This sticker
indicates that there are vacuum insulation
panels (VIP) or perlite panels in the door
and/or housing. This advice is only relevant
to recycling. Do not remove the sticker.
Please note the warning messages and other
specific advice in the other chapters:
DANGER indicates an immediately
hazardous situation which will
lead to death or serious injuries if
it is not avoided.
WARNING indicates a hazardous situation
which may lead to death or serious
injuries if it is not avoided.
General safety instructions
* Depending on model and options 5
CAUTION indicates a hazardous situation
which may lead to minor or
moderate injuries if it is not
avoided.
NOTICE indicates a hazardous situation
which may lead to damage to
property if it is not avoided.
Note indicates useful instructions and
tips.
3 Putting into operation
3.1 Switching on appliance
Ensure that the following conditions are met:
qAppliance is installed and connected according to instal‐
lation instructions.
qAll adhesive strips, adhesive and protective films as well
as transport safety devices in and on the appliance are
removed.
qAll marketing leaflets are removed from the drawers.
Fig. 2
uSwitch on the appliance using the control panel next to
the display.
wThe status display appears.
The appliance starts in DemoMode:
If the appliance starts in DemoMode, you can deactivate
DemoMode within the next 5 minutes.
Fig. 3
uPress Confirm next to the display for 3 seconds.
wDemoMode is deactivated.
Note
The manufacturer recommends:
uPlace the food inside: Wait for around 6 hours until the
set temperature is reached.
uStore frozen foods at -18 °C or colder.*
3.2 Inserting the components
Note
Accessories can be purchased from the Liebherr-
Hausgeräte store at home.liebherr.com/shop/de/deu/
zubehor.html.
uInsert the supplied components to make the most of your
appliance.
4 Foods management
4.1 Storing food
WARNING
Risk of fire
uDo not use any electrical appliances in the food area of
the appliance unless recommended by the manufacturer.
Note
The energy consumption increases and the cooling power
goes down if ventilation is not sufficient.
uAlways keep air slots clear.
When storing food, always observe the following:
qAir vents on the inside rear wall are unobstructed.
qAir vents on the fan are unobstructed.*
qFood is in sealed packaging.
qFoods that easily absorb or give off smell or taste are
stored in sealed containers or covered.
qRaw meat and fish are in clean, sealed containers to
prevent them coming into contact with or dripping onto
other foods.
qLiquids are in sealed containers.
qFoods are not stored too closely together, as the air
needs to circulate.
Note
Failure to follow these guidelines can lead to food perishing.
4.1.1 Fridge section
The natural air circulation creates a range of temperatures.
Arrange your food as follows:
uIn the top section and in the door: butter and cheese,
preserves and tubes.
uIn the coldest zone Fig. 1 (C): Perishable foods such as
ready-to-eat meals, meat and sausages
uOn the bottom shelf: Raw meat and fish
4.1.2 EasyFresh-Safe
This compartment is great for non-packaged foods, such as
fruit and vegetables.
The air moisture in the compartment depends on the mois‐
ture content of the items being stored and the number of
times the door is opened. You can adjust the air moisture.
Arrange your food as follows:
uStore your loose fruit and vegetables.
uExcessive air moisture: Regulate the air humidity
(see 7.9 Adjusting the moisture levels) .
4.1.3 Freezer compartment*
The air temperature can vary in the compartment when
shown on a thermometer or other gauges. The temperature
varies more when the compartment is half-full or empty and
can rise to more than -18 °C.
Putting into operation
6 * Depending on model and options
Freezing food
You can freeze as many kilograms of fresh food within 24
hours as is indicated on the model plate .
So that the food is rapidly frozen through to the core, keep
to the following quantities per pack:
-Fruit, vegetables up to 1 kg
-Meat up to 2.5 kg
Arrange your food as follows:
CAUTION
Risk of injury from glass fragments!
Drink bottles and cans may explode if frozen. This applies
particularly to carbonated drinks.
uDo not freeze bottles and cans of drink!
uPut the packaged food into the freezer compartment so
that it is in contact with the floor or the side walls.
Defrost the food
- In the fridge
- In the microwave
- In the stove/oven
- At room temperature
WARNING
Risk of food poisoning!
uDo not re-freeze thawed food.
uOnly take out the food you need at the time.
uCook defrosted food as soon as possible.
4.2 Storage times
Refer to the specified storage times as a guide.
In the case of foods with a minimum shelf life, the date
indicated on the packaging still applies.
4.2.1 Fridge section
Always follow the best-before date stated on the packaging.
4.2.2 Freezer compartment*
Recommended shelf-lives for various types of food
Ice cream at -18 °C 2 to 6 months
Cold cuts, ham at -18 °C 2 to 3 months
Bread, baked goods at -18 °C 2 to 6 months
Game, pork at -18 °C 6 to 9 months
Fatty fish at -18 °C 2 to 6 months
Lean fish at -18 °C 6 to 8 months
Cheese at -18 °C 2 to 6 months
Poultry, beef at -18 °C 6 to 12 months
Vegetables, fruit at -18 °C 6 to 12 months
5 Saving energy
-Pay attention to good ventilation. Do not cover ventilation
holes or grids.
-Always keep the fan air slits clear.*
-Do not install the appliance in direct sunlight, next to an
oven, radiator or similar.
-Energy consumption depends on the installation condi‐
tions, e.g. the ambient temperature (see 1.4 Appliance
range of use) . A warmer ambient temperature can
increase the energy consumption.
-Open the appliance for as short a time as possible.
-The lower the temperature is set the higher the energy
consumption.
-Sort your food: home.liebherr.com/food.
-Keep all food properly packed and covered. This prevents
frost from forming.
-Only take food out for as long as necessary so that it
doesn’t warm up too much.
-Inserting warm food: allow to cool down to room temper
ature first.
-Thaw frozen food in the refrigerator.*
-If there is a thick layer of frost in the appliance: defrost
the appliance.*
-For longer periods of absence, use HolidayMode
(see HolidayMode) .
6 Controls
6.1 Controls and displays
The display provides a quick overview of the temperature
setting and the status of functions and settings. You
can control the functions and settings either by deacti‐
vating/activating them or by selecting a value.
6.1.1 Status display
Fig. 4
(1) Temperature display of
the fridge section
The Status display shows the set temperature and is the
home display. From there, you can navigate to the options
and settings.
6.1.2 Navigation
Navigate in the menu to access the individual functions.
An audible signal sounds after confirming a function or
setting. If no selection is made after 10 seconds the display
switches to the Status display.
The appliance is operated with the buttons next to the
display.
Fig. 5
(1) Navigation arrow left/
right
(2) Confirm
Navigation arrow left/right Fig. 5 (1):
-Navigating in the menu. After the last menu page, it goes
back to the first one.
Saving energy
* Depending on model and options 7
Confirm Fig. 5 (2):
-Activating/deactivating a function.
-Open a submenu.
-Confirm a selection. After confirmation the display
switches back to the menu.
Back to Status display: in the fastest manner:
-Close and open the door.
-or wait 10 seconds. The display switches to the Status
display.
6.1.3 Operating structure
The controls are explained by a template. The display
changes depending on the function or settings.
Menus without a submenu
Fig. 6
(1) Status deactivated /
status activated white
bar in the top area
(3) Menu: Function name or
menu: Setting name
(2) Symbol or activated
value
Menus with a submenu
Fig. 7
(1) Menu: Function name
or menu: Setting name
(3) Symbol or activated
value
(2) Status (4) Submenu: function name
or submenu: Setting
name
(2) off / on
You can navigation as follows:
-Press the left/right Fig. 5 (1) arrow to navigate.
-Press Confirm Fig. 5 (2) to open the submenu Fig. 7 (4).
Press the left/right Fig. 5 (1) arrow to navigate.
Set a new value: Press Confirm Fig. 5 (2) to select an
active value Fig. 6 (1).
Back to the menu: Press Confirm Fig. 5 (2) to select the
active value Fig. 6 (2).
6.1.4 Display symbols
Display symbols provide information on the current appli‐
ance status:
Symbol Appliance status
Standby
The appliance or temperature zone
is switched off.
Flashing number
Appliance is working. Temperature
flashes until the set value is
reached.
Flashing symbol
Appliance is working. Setting is
made.
Bar grows steadily
Function is activated.
6.2 Control concept
6.2.1 Activating/deactivating the function
You can activate/deactivate the following functions:
Symbol Function
SuperCoolx
*PowerCoolx*
PartyModex
HolidayMode
E-Saver
x When function is on, the appliance works harder. This
means appliance noise when operating may be louder for
a short while, and more energy will be consumed.
uPress the navigation arrows Fig. 5 (1) repeatedly until the
function is displayed.
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus appears in the menu.
wFunction is on/off.
6.2.2 Selecting function value
With the following functions you can set a value in the
submenu:
Symbol Function
Setting the temperature
Switch the appliance on/off
uTap the navigation arrows Fig. 5 (1) repeatedly until the
function is displayed.
uPress Confirm Fig. 5 (2).
uSelect the setting value with the navigation arrows
Fig. 5 (1).
Setting the temperature
uPress Confirm Fig. 5 (2).
Controls
8 * Depending on model and options
wYou hear the confirmation tone.
wStatus: On Fig. 6 (1) appears briefly in the submenu
Fig. 7 (4).
wDisplay switches back to the menu.
6.2.3 Activating/deactivating settings
You can activate/deactivate the following settings:
Symbol Setting
WiFi1
Entry lock2
SabbathMode2
Cleaning Mode2
Reminders1
Reset2
Switch off 2
uTap the navigation arrows Fig. 5 (1) repeatedly until the
settings appear.
uPress Confirm Fig. 5 (2).
uTap the navigation arrows Fig. 5 (1) repeatedly until the
desired setting is displayed.
1 Activate setting (shortpress)
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus appears in the menu.
wSetting is on / off.
2 Activate setting (longpress)
uTo Confirm Fig. 5 (2), press for 3 seconds.
wYou hear the confirmation tone.
wStatus appears in the menu.
wDisplay changes.
6.2.4 Selecting the setting value
With the following settings you can set a value in the
submenu:
Symbol Settings
Brightness
Door alarm
uTap the navigation arrows Fig. 5 (1) repeatedly until
settings appears.
uPress Confirm Fig. 5 (2).
uTap the navigation arrows Fig. 5 (1) repeatedly until the
desired setting is displayed.
uPress Confirm Fig. 5 (2).
uSelect the setting value with the navigation arrows
Fig. 5 (1).
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus appears briefly in the submenu.
wDisplay switches back to the menu.
6.2.5 Go to the Customer menu
You can see the following settings in the Customer menu:
Symbol Function
*
C-Value 1*
Software
uPress the navigation arrows Fig. 5 (1) repeatedly until the
settings appear.
uPress Confirm Fig. 5 (2).
uPress the navigation arrows Fig. 5 (1) repeatedly until the
appliance information appears in the display.
uPress Confirm Fig. 5 (2).
uEnter the numerical code 151.
wThe customer menu appears.
uPress the navigation arrows Fig. 5 (1) repeatedly in the
customer menu until the desired setting appears.
1 Select the value
uPress Confirm Fig. 5 (2).
wYou hear the confirmation tone.
wStatus appears briefly in the display.
wDisplay switches back to the menu.
2 Activate the setting
uToConfirm Fig. 5 (2), press for 3 seconds.
wYou hear the confirmation tone.
wStatus appears on the display.
wThe symbol flashes as long as the appliance is working.
6.3 Functions
Turn off appliance
This setting turns off the whole appliance.
Switching off the entire appliance
Fig. 8
uActivating/deactivating (see 6.2 Control concept) .
wOff: Display goes black.
WiFi
Use this function to connect your appliance to the WiFi. You
can then operate it via the SmartDevice app on a mobile
device. You can also use this function to disconnect or reset
the WiFi connection. To connect your appliance to the WiFi,
you need the SmartDeviceBox. For more information about
the SmartDeviceBox and how to use the SmartDevice app:
(see 1.3 SmartDevice)
Controls
* Depending on model and options 9
Note
You cannot use the SmartDeviceBox in the following coun‐
tries: Belarus, Kazakhstan, Russia. The SmartDevice func‐
tion is not available.
Establishing a WiFi connection
Make sure that the following requirements are fulfilled:
qYou have purchased and inserted a SmartDeviceBox.
(see 1.3 SmartDevice)
qYou have installed the SmartDevice app (see
apps.home.liebherr.com).
Fig. 9
uActivate the setting. (see 6.2 Control concept)
wConnection is established: Status: activated Fig. 6 (1) and
WiFi connecting appears. The symbol flashes.
wConnection is established: Status: activated Fig. 6 (1)
appears.
wConnection failed: Status and Connect appear. The
symbol is permanently visible.
Disconnecting from the WiFi
uDeactivate the setting. (see 6.2 Control concept)
Fig. 10
w
There is no connection: Symbol is permanently
visible.
Resetting the WiFi connection
uReset settings. (see 6.2 Control concept)
Fig. 11
wThe connection and other settings are reset to the
factory settings.
Temperature
The temperature depends on the following factors:
-The amount of times the door is opened
-How long the door is open for
-The room temperature of the installation site
-The type, temperature and amount of food
Temperature zone Recommended setting
Fridge section 5 °C
Setting the temperature
Fig. 12
uSet the value. (see 6.2 Control concept) .
wSet temperature is shown at the bottom right of the
display.
SuperCool
This function selects the lowest cooling temperature. This
gives you colder storage temperatures.
This function is relevant to the fridge section Fig. 1 (A)
You can also reach lower temperatures in the 4-star
freezer.*
Use:
-Cool large amounts of food quickly.
-Freeze food.*
Activating/deactivating the function
uUsing the 4-star freezer: activate the function when you
add the goods.*
uUsing the fridge section: activate the function when you
add the goods.
uActivating/deactivating (see 6.2 Control concept) .
The function automatically turns off. The appliance goes
back to normal mode. The temperature adjusts itself to the
set level.
PowerCool*
This function provides the perfect blanket temperature to
cool your food.*
This function refers to the fridge section Fig. 1 (A).*
Use:*
-At higher room temperatures (from approx. 35 °C )
Controls
10 * Depending on model and options
-When humidity is high e.g. on summer days
-When storing moist goods, to avoid condensation
building up inside
Activating/deactivating the function*
uActivating/deactivating (see 6.2 Control concept) .
Note
The fan can run even when function is deactivated. This
ensures optimal temperature distribution in the appliance.
wFunction activated: Energy consumption of the appliance
is slightly increased.
PartyMode
This option offers an assortment of special functions and
settings that are useful if you are having a party.
The following functions are on:
-SuperCool
All the functions can be adjusted flexibly and separately.
Changes are discarded when the function turns off.
Activating/deactivating the function
uActivating/deactivating (see 6.2 Control concept) .
wOn: All functions are activated at the same time.
wDeactivated: Previously set temperatures are restored.
After 24 hours the function turns off automatically.
HolidayMode
This function minimises the energy consumption during
an extended absence. The temperature of the refrigerator
compartment is set to 15 °C and this is displayed on the
status screen when the temperature has been reached.
Use:
-Save energy if you plan to be away for a while.
-Avoid coming home to bad smells and mould.
Activating/deactivating the function
uEmpty everything from the fridge section.
uActivating/deactivating (see 6.2 Control concept) .
wOn: Fridge temperature is raised.
wOff: the previously set temperature is restored.
SabbathMode
With this function you can activate or deactivate the
SabbathMode. If you activate this function, some electronic
functions will be switched off. This allows your appliance to
meet religious requirements on Jewish holidays such as the
Sabbath and comply with STAR-K Kosher certification.
Appliance status with active SabbathMode
The status display continuously shows SabbathMode.
All functions in the display except the Deactivate
SabbathMode function are locked.
Active functions remain active.
The display stays lit when you close the door.
The interior lighting is off.
Reminders are disabled. The set time intervals are paused.
Reminders and warnings are not displayed.
There is no door alarm.
Appliance status with active SabbathMode
There is no temperature alarm.
The defrost cycle only works for the specified time without
taking account of appliance use.
After a power failure, the appliance returns to
SabbathMode.
Appliance status
Note
This appliance has certification from the “Institute for
Science and Halacha”. (www.machonhalacha.co.il)
You can find a list of STAR-K-certified appliances at
www.star-k.org/appliances.
Activating SabbathMode
WARNING
Danger of food poisoning from spoiled food!
If you have SabbathMode activated and a power failure
occurs, no message appears in the status display about the
power failure. Once the power is restored, the appliance
continues to operate in SabbathMode. The power failure
may mean that food spoils and the consumption of this food
could lead to food poisoning.
After a power failure:
uDo not consume food that was frozen and has thawed
out.
uCall up the settings menu. (see 6.2 Control concept)
uTap the navigation arrow repeatedly until the corre‐
sponding function is displayed.
3s
Fig. 13
uComplete the steps (see Fig. 1525) .
wSabbathMode is activated.
wStatus display continuously shows SabbathMode.
Deactivating SabbathMode
uCall up the settings menu. (see 6.2 Control concept)
uTap the navigation arrow repeatedly until the corre‐
sponding function is displayed.
3s
Fig. 14
uComplete the steps (see Fig. 1526) .
wSabbathMode is deactivated.
E-Saver
This function activates or deactivates the energy-saving
mode. When you activate this function, the energy
consumption decreases and the temperature increases by
2 °C in the appliance. The food remains fresh, but the shelf
life is shortened.
Controls
* Depending on model and options 11
Temperature zone Recommended
setting (see
Temperature)
Temperature
when E-Saver
activated
Fridge
compartment
5 °C 7 °C
Temperatures
Activating E-Saver
uTap navigation arrow repeatedly until corresponding
function is displayed.
E-Saver
E-Saver
Fig. 15
uComplete the steps (see Fig. 1527) .
wEnergy-saving mode is activated.
Deactivating E-Saver
uTap navigation arrow repeatedly until corresponding
function is displayed.
E-Saver
E-Saver
Fig. 16
uComplete the steps (see Fig. 1528) .
wEnergy-saving mode is deactivated.
CleaningMode
Use this setting to easily clean the appliance.
This setting refers to the fridge section Fig. 1 (A).
Use:
-Clean the fridge section by hand.
What happens on the appliance when this setting is on:
-The fridge section is switched off.
-The internal light is on.
-Reminders and warnings are not shown. There is no
acoustic signal.
Activating/deactivating settings
uActivating/deactivating the setting (see 6.2 Control
concept) .
wOn: fridge section is off. Light stays on.
wOff: preset temperature is restored.
After 60 min the setting turns off automatically. The appli‐
ance then continues running in normal mode.
Display brightness
Set the brightness level of the display.
You can set the following brightness levels:
-40%
-60%
-80%
-100%
Choose the setting
uSet the level (see 6.2 Control concept) .
Door alarm
Set the time before the door alarm (see Close the door)
sounds.
The options are as follows:
-1 min
-2 min
-3 min
-Off
Choose the setting
uSet the time (see 6.4 Fault messages) .
Entry lock
This setting prevents unintentional use of the appliance,
e.g. by children.
Use:
-Avoid settings being changed unintentionally.
-Avoid the appliance being switched off unintentionally.
-Avoid the temperature being changed unintentionally.
Activating/deactivating settings
uActivating/deactivating. (see 6.2 Control
concept)
Info
This setting allows the appliance information to be read out
as well as access to the customer menu.
It provides the following information:
-Model name
-Index
-Serial number
-Service number
Show appliance data
uTap the navigation arrows Fig. 5 (1) repeatedly until the
settings appear.
uPress Confirm Fig. 5 (2).
uTap the navigation arrows Fig. 5 (1) repeatedly until the
information is displayed.
uRead the appliance info.
Reminder
Reminders are given out acoustically by a beep and visually
by a symbol in the display. The signal gets louder until the
alert stops.
Replace FreshAir active carbon filter*
This message appears when the air filter needs replacing.
uChange the air filter every six months.
uConfirm the message with OK.
wThe service interval resets.
Controls
12 * Depending on model and options
wThe air filter guarantees the air quality in the fridge.
Activating the setting
uActivating/deactivating (see 6.2 Control concept) .
Reset
This function resets all settings to the factory settings. All
settings that you have made thus far will be reset to their
original values.
Activating the setting
uActivate (see 6.2 Control concept) .
6.4 Fault messages
Fault messages appear in the display. There are two catego‐
ries of fault message:
Category Meaning
Message Reminder of general procedures. You can carry
out these procedures to eliminate the message.
Warning Appears when there are malfunctions. A signal
sounds in addition to the display. The signal
becomes louder until you acknowledge by
tapping the display. You can eliminate simple
defects yourself. For more serious defects, you
must contact customer service.
6.4.1 Warnings
Close the door
This message appears if the door is open for too long.
You can set how long it takes for this message to appear .
uStop alarm: Confirm the message.
-or-
uClose the door.
Error
This message appears if there is a fault with the appliance.
An appliance component indicates a fault.
uOpen the door.
uNote down the fault code.
uConfirm the message.
wThe signal tone stops.
wThe status display appears.
uClose the door.
uContact customer service. (see 9.4 Customer Services)
6.4.2 DemoMode
If “D” appears on the display, demo mode is on. This option
is designed for retailers, as it turns off all the cooling func‐
tions.
Stopping DemoMode
If you see the following running in the display:
uConfirm the display within the countdown.
wDemoMode is off.
If the timer is not running:
uUnplug the appliance.
uPlug the appliance in again.
wDemoMode is off.
7 Features
7.1 4-star freezer compartment*
7.1.1 Opening/closing the freezer compartment
Fig. 17
Opening the freezer compartment:
uReach into the handle area from below.
uPush the handle plate while pulling the door towards you.
Closing the freezer compartment:
uClose the door while pushing from the front.
wDoor is engaged.
7.2 Door rack
7.2.1 Move/remove the door rack
Fig. 18
uSlide the rack upwards.
uPull forwards.
uRe-insert it in reverse order.
7.2.2 Disassembling the door rack
The door rack can be taken apart for cleaning.
Features
* Depending on model and options 13
Fig. 19
uDisassemble the door rack.
7.3 Shelves
7.3.1 Adjusting/removing the shelves
The shelves are prevented from being pulled out acciden‐
tally by pull out stops.
Fig. 20
uLift the shelf and pull forward.
wLine up the side runner.
uAdjust the height of the shelf: Lift or lower it to the
desired height and slide it in.
-or-
Fig. 21
uRemove the shelf completely: Pull it out to the front.
uEasier removal: Set the shelf at an angle.
uInsert the shelf again: Slide it in all the way.
wThe pull-out stoppers point downwards.
wThe pull-out stoppers are behind the front support.
You can also remove the shelf above the EasyFresh
compartments.
Fig. 22
Removing the shelf:
uLift the shelf at the front and back.
uPull it out towards you.
Do not store any goods on the compartment cover below!
Inserting the shelf:
uPlace the shelf at an angle, sloping down towards the
back.
wThe pull-out stoppers point downwards.
uSlide the shelf into place.
7.3.2 Dismantling the shelves
The shelves can be dismantled for cleaning.
Fig. 23
uDismantling the shelf.
7.4 Dividing shelf*
7.4.1 Using the dividing shelf
The shelves are prevented from being pulled out acciden‐
tally by pull out stops.
Fig. 24
uPush the dividing shelf underneath as shown.
Fig. 25
Adjusting the height:
uPull the glass panels out Fig. 25 (1) from the front, one at
a time.
uRelease the support rails and click in at the height you
want.
uSlide in the glass panels one at a time.
wFlat pull-out stoppers at the front, right behind the
support rails.
wHigh pull-out stoppers at the back.
Using both shelves:
uHold the glass panel with one hand and pull it to the
front.
wThe glass panel Fig. 25 (1) and trim strip are at the front.
wThe stops Fig. 25 (3) point down.
Appliances with freezer compartment:*
Features
14 * Depending on model and options
uDo not place the support rails and dividing shelf in front
of the fan.*
7.5 VarioSafe*
The VarioSafe provides space for compact foodstuffs and
packages, pots and glasses.
7.5.1 Using the VarioSafe
You can remove the drawer and slide it back in at 2 different
heights. This is handy for storing taller items in the drawer.
Fig. 26
uRemove the drawer.
uSlide back at the height you want Fig. 26 (1) or Fig. 26 (2).
7.5.2 Repositioning the VarioSafe
You can shift the height of the entire VarioSafe.
Fig. 27
uPull forwards.
wLine up the side runner.
uLift or lower to the height you want.
uSlide to the rear.
7.5.3 Removing the entire VarioSafe
You can remove VarioSafe as a whole unit.
uPull forwards.
wLine up the side runner.
Fig. 28
uTip to the side and pull towards you.
7.5.4 Disassembling the VarioSafe
You can take the VarioSafe apart for cleaning.
Fig. 29
uDisassembling the VarioSafe
7.6 Space for baking tray*
There is space for a baking tray Fig. 1 (8) above the drawers.
Fig. 30
Ensure that the following conditions are met:
qMax. baking tray dimensions are adhered to (see 9.1 Tech‐
nical specifications) .
qBaking tray is cooled to room temperature.
qThe lowest door rack is set at least one position higher.
With the door open to 90°:
uSlide the baking tray onto the lower side runners.
7.7 Drawers
You can remove the drawers for cleaning.
The way to remove/insert the drawers varies depending
on the pull-out system. Your appliance can contain various
pull-out systems.
Note
The energy consumption increases and the cooling power
goes down if ventilation is not sufficient.
uAlways leave the fan air vents clear on the back wall!
7.7.1 Drawer on appliance base or glass shelf
The drawer runs directly on the appliance base or on a glass
shelf. There are no rails.
When you remove the drawers, you can use the glass
shelves below them as storage shelves.*
Removing drawer
Fig. 31
uRemove drawer as shown in the illustration.
Features
* Depending on model and options 15
Inserting drawer
Fig. 32
uInsert drawer as shown in the illustration.
7.7.2 Drawer on rails
Removing drawer
Fig. 33
uRemove drawer as shown in the illustration.
Inserting drawer
Fig. 34
uInsert drawer as shown in the illustration.
7.7.3 Drawer on telescopic rails
The drawer runs on extendible rails (telescopic rails). There
are fully extendible telescopic rails and telescopic rails with
partial pull-out. Drawers which are fully extendible can be
pulled out fully from the appliance. Drawers with partial
pull-out cannot be removed fully from the appliance. The
system in your appliance depends on the type of appliance.
Partial pull-out fridge compartment
Removing drawer
Fig. 35
uPull out drawer half-way. Fig. 35 (1)
uLift the drawer from the bottom. Fig. 35 (2)
uLift and hold the drawer and at the same time pull it
forwards.
uInsert left rail. Fig. 35 (3)
uInsert right rail. Fig. 35 (4)
uRemove drawer to the front. Fig. 35 (5)
Fig. 36
If the rails are not yet fully inserted after removing the
drawer:
uPush rails in completely.
Inserting drawer
Fig. 37
uSlide rails in.
uPlace drawer on rails.
uSlide in drawer to the back.
7.8 EasyFresh-Safe cover
You can remove the compartment cover for cleaning.
7.8.1 Removing the compartment cover
Fig. 38
When the drawers are removed:
uPull the lid up at the front to the opening in the retaining
parts Fig. 38 (1).
uLift from the back and pull it up and out Fig. 38 (2).
7.8.2 Inserting the compartment cover
Fig. 39
If the text THIS SIDE UP points upwards:
uInsert the lip of the cover over the opening of the rear
bracket Fig. 39 (1) and click into place Fig. 39 (2).
Features
16 * Depending on model and options
uPosition the cover where you want it (see 7.9 Adjusting
the moisture levels) .
7.9 Adjusting the moisture levels
You can adjust the moisture in the drawer yourself by
adjusting the compartment cover.
The compartment lid is attached to the drawer and can be
hidden by a shelf or additional drawers.
Fig. 40
Low air humidity
uOpen the drawer.
uSlide the compartment cover forwards.
wWith the drawer closed: Gap between the cover and the
compartment.
wThe air moisture in the Safe decreases.
High air moisture
uOpen the drawer.
uSlide the cover back.
wWith the drawer closed: The cover seals the compart
ment.
wThe air moisture in the Safe increases.
If there is too much moisture in the compartment:
uChoose the setting “low air moisture”.
-or-
uRemove any excess moisture with a cloth.
7.10 Pull-out board with bottle basket*
Removable bottle baskets on the pull-out board offer plenty
of space to store bottles. You can remove the bottle baskets
to make room for a drinks crate in the pull-out board.
7.10.1 Using the bottle basket
Fig. 41
uSlide the bottle rack at the edges.
wThe bottles are prevented from falling over.
7.10.2 Disassembling the pull-out board
The pull-out board is mounted on a glass panel with pull-out
rails.
You can dismantle the pull-out board for cleaning.
Removing the pull-out board
uRemove the bottle baskets.
Fig. 42
uTo remove the pull-out board with glass panel: Gently lift
the glass panel at the front Fig. 42 (1) and pull out to the
front Fig. 42 (2).
Fig. 43
uSlide the pull-out board all the way in Fig. 43 (1).
uRelease the clips at the back Fig. 43 (2).
uRemove the pull-out board from the front Fig. 43 (3).
Inserting the pull-out board
Fig. 44
uPlace centrally on the rails Fig. 44 (1).
uSlide the pull-out board all the way in Fig. 44 (2).
uPress down at the back until it clicks into place
Fig. 44 (3).
uTo insert the pull-out board with glass panel: Slide to the
rear.
Features
* Depending on model and options 17
7.11 Glass shelves*
You can remove the glass shelves under the drawers for
cleaning.
7.11.1 Removing / inserting the glass shelf
Make sure that the following requirements are fulfilled:
qGlass shelf under the drawer: The drawer has been
removed. (see 7.7 Drawers)
qPull-out board under the bottle basket: Bottle basket
has been removed. (see 7.10 Pull-out board with bottle
basket*) *
Removing glass shelf
Fig. 45 Example illustration of glass shelf
uLift glass shelf at the front. Fig. 45 (1)
uTake out glass shelf to the front. Fig. 45 (2)
Inserting glass shelf
Fig. 46 Example illustration of glass shelf
uPosition glass shelf at an angle behind the stoppers. (see
Fig. 1558)
uLower glass shelf.
uSlide in glass shelf to the back.
7.12 Accessories
7.12.1 Egg rack
You can pull out and turn the egg rack. You can use both
sides of the egg rack so you can label specifics like the
purchase date.
Using the egg rack
Fig. 47
uTop layer: for storing hen eggs.
uBottom layer: for storing quail eggs.
7.12.2 Bottle holder
Using the bottle holder
Fig. 48
uPush the bottle holder onto the bottles.
wThe bottles are prevented from falling over.
Removing the bottle holder
Fig. 49
uMove the bottle holder all the way to the right.
uPush the bottle holder to the back to remove.
8 Maintenance
8.1 FreshAir carbon filter*
The FreshAir carbon filter is in the compartment above the
fan.
It guarantees the best air quality.
qReplace the carbon filter every 6 months.
When the reminder is set, a message on the display
prompts you to change it.
qThe carbon filter can be disposed of with the regular
household waste.
Note
FreshAir activated charcoal filters can be purchased
from the Liebherr-Hausgeräte store at home.liebherr.com/
shop/de/deu/zubehor.html.
Maintenance
18 * Depending on model and options
8.1.1 Removing the FreshAir carbon filter
Fig. 50
uPull out the compartment Fig. 50 (1).
uRemove the carbon filter Fig. 50 (2).
8.1.2 Inserting the FreshAir carbon filter
Fig. 51
uInsert the carbon filter as shown in the diagram
Fig. 51 (1).
wThe carbon filter clicks into place.
If the carbon filter is pointing downwards:
uPush the compartment in Fig. 51 (2).
wThe carbon filter is now ready for use.
8.2 Disassembling / assembling pull-
out systems
8.2.1 Notes on disassembly
You can disassemble some of the pull-out systems for
cleaning. Your appliance can contain a variety of pull-out
systems.
The following pull-out systems can be disassembled or
cannot be disassembled:
Pull-out system can be disassembled /
cannot be disassembled
Drawer on appliance
base or glass shelf
cannot be disassembled
Drawer on rails cannot be disassembled
Partial pull-out fridge
compartment
cannot be disassembled
Pull-out board with
bottle basket*
can be disassembled
(see 8.2.2 Pull-out board with
bottle basket*) *
8.2.2 Pull-out board with bottle basket*
Disassembling pull-out system
Make sure the following prerequisites are met:
qBottle basket has been removed. (see 7.10 Pull-out board
with bottle basket*)
qGlass shelf has been removed. (see 7.11 Glass shelves*)
Fig. 52 Glass shelf with rails
uPush up front click-in hooks. Fig. 52 (1)
uMove the pull-out rails to the side Fig. 52 (2) and to the
rear Fig. 52 (3).
Installing pull-out system
Fig. 53 Glass shelf with rails
uHook in rail at the back. Fig. 53 (1)
uHook in rail at the front. Fig. 53 (2)
8.3 Defrosting the appliance
WARNING
Improper defrosting of the appliance!
Injuries and damage.
uDo not use mechanical equipment or other methods to
speed up the defrosting process other than those recom‐
mended by the manufacturer.
uDo not use electrical heating or steam-cleaning appli‐
ances, naked flames or defroster sprays to defrost.
uDo not use sharp objects to remove ice.
Defrosting is performed automatically. The water from the
thawing process drains through the outlet and evaporates.
Water drops or a thin layer of frost or ice can form on the
back wall; this is a completely normal part of the applian‐
ce’s function. This must not be removed.
A layer of frost or ice can from briefly due to the energy-
optimised control of the device.
uClean the drain opening regularly (see 8.5 Cleaning the
appliance) .
8.4 Defrosting the freezer compartment
manually*
A layer of frost or ice forms after prolonged use.
The following factors promote the formation of frost or ice:
- The appliance is opened frequently.
- Hot food is put in.
uSwitch off the appliance .
uPull out the mains plug or switch off the fuse.
uWrap the frozen produce in newspaper or blankets and
store in a cool place.
Maintenance
* Depending on model and options 19
uPlace a pan of hot water (not boiling) on the middle shelf.
wThis speeds up the defrosting process.
uLeave the compartment and appliance door open during
defrosting.
uRemove loosened pieces of ice.
uMake sure that there is no melted ice water in the
cabinet.
uSoak up the melted ice water with a sponge or cloth
several times as necessary.
uClean the appliance (see 8.5 Cleaning the appliance) .
8.5 Cleaning the appliance
8.5.1 Ready
WARNING
Danger of electric shock!
uRemove the refrigerator connector or interrupt the power
supply.
WARNING
Risk of fire
uDo not damage the refrigeration circuit.
uEmpty the appliance.
uRemove mains connector.
-or-
uActivate CleaningMode. (see CleaningMode)
8.5.2 Cleaning the interior
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
uPlastic surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uMetal surfaces: clean by hand with a soft clean cloth,
lukewarm water and a little detergent.
uDrain hole: remove deposits using a thin item (for
example a cotton bud).
8.5.3 Clean the components
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
Clean with a soft, clean cloth, lukewarm water and some
detergent:
- Door rack
- Shelf
- Dividing shelf*
- VarioSafe*
- Bottle basket and pull-out panel*
- EasyFresh-Safe cover
- Drawer
Clean with a damp cloth:
- Retractable rails
Please note: The grease in the tracks is used for lubrica‐
tion and must not be removed!
Wash in the dishwasher up to 60 °C:
- Bottle rack
- Holder of the dividing shelf
- Egg rack
uTo disassemble components: see the relevant section.
uClean the components.
8.5.4 After cleaning
uWipe the appliance and the components dry.
uConnect and switch on the appliance.
The temperature is cold enough:
uPlace the food inside.
uRepeat cleaning regularly.
9 Customer help
9.1 Technical specifications
Temperature range
Cooling 2 °C to 9 °C
Maximum freezer quantity / 24 hrs
Freezer compart‐
ment*
See the type plate under “Freezer
goods … /24 hours”*
Maximum component capacity
Features Appliance
width
550 mm
(see instal‐
lation
instruc‐
tions,
appliance
dimen‐
sions)
Appliance
width
600 mm
(see
installa‐
tion
instruc‐
tions,
appliance
dimen‐
sions)
Appliance
width
700 mm
(see instal‐
lation
instruc‐
tions, appli‐
ance
dimen‐
sions)
Pull-out board* 20 kg* 20 kg* 20 kg*
Drawer on glass
shelf*
(see 7.7.1 Drawer on
appliance base or
glass shelf) *
12 kg* 15 kg* --*
Maximum size baking tray*
Width 466 mm
Depth 386 mm
Height 50 mm
Customer help
20 * Depending on model and options
Lighting
Class1Light source
This product contains one or more energy
efficiency class F light sources.
LED
1 The appliance may contain light sources with different
energy efficiency classes. The lowest energy efficiency class
is indicated.
9.2 Operating noises
The appliance makes different noises when it is on.
-At higher temperatures the appliance uses less energy
but works for longer. It is quieter.
-At lower temperatures the food is cooled faster. It is
louder.
Examples:
Functions on (see 6.3 Functions)
Fan running*
Food recently added
High ambient temperature
Door open for a while
Noise Possible cause Type of noise
Bubbling and
splashing
Coolant flowing
into the cooling
circuit.
Normal operating
noise
Hissing Coolant sprays
into the cooling
circuit.
Normal operating
noise
Humming The appliance
is cooling. The
volume depends
on the cooling
output.
Normal operating
noise
Suction noises Soft-closing door
is being opened
and closed.
Normal operating
noise
Noise Possible cause Type of noise
Humming and
rustling*
The fan is
running.*
Normal operating
noise*
Clicking Components are
switched on and
off.
Normal switching
noise
Rattling or
humming
Valves or flaps are
working.
Normal switching
noise
Noise Possible
cause
Type of noise Lifting
Vibration Improper
installation
Defective
noise
Check the
installation.
Level the
appliance.
Rattling Components,
items inside
the appliance
Defective
noise
Secure
components.
Leave
enough
space
between the
items.
9.3 Technical fault
Your appliance is designed and built to ensure it works reli‐
ably and has a long service life. In the unlikely event that
a fault occurs during operation, please check whether it is
due to an operating error. If so, you will be charged for the
callout and repair costs even if it falls within the warranty
period.
You can fix the following faults yourself.
9.3.1 Appliance function
Defect Cause Remedy
The appliance is
not working.
The appliance is not switched on. uSwitch the appliance on.
The power plug is not properly
plugged into the socket.
uCheck the power plug.
There is something wrong with the
power outlet fuse.
uCheck the fuse.
Power cut uKeep the appliance closed.
uProtecting food: Lay freezer packs on top of the food or
use another freezer if the power is off for a prolonged
period.
uDo not re-freeze defrosted food,
The appliance plug does not fit the
appliance properly.
uCheck the appliance plug.
Temperature is not
cold enough.
The appliance door is not closed
properly.
uClose the appliance door.
Not enough ventilation. uKeep ventilation grille clear, and clean it.
The ambient temperature is too
high.
uSolution: (see 1.4 Appliance range of use) .
Customer help
* Depending on model and options 21
Defect Cause Remedy
The appliance was opened too
many times or for too long.
uWait to see if the required temperature corrects itself.
If not, contact Customer Service (see 9.4 Customer Serv‐
ices) .
The temperature is set incorrectly. uTurn down the temperature and check after 24 hours.
The appliance is too close to a heat
source (oven, radiator, etc).
uMove the appliance or the heat source.
The appliance was not correctly
installed in the recess.
uCheck if the appliance was installed correctly and that
the door closes properly.
The door seal is
defective or needs
to be replaced for
another reason.
The door seal can be replaced. It
can be replaced without the need
for special tools.
uContact Customer Services (see 9.4 Customer Services) .
The appliance
builds up too much
ice or condensa‐
tion.
The door seal may have slipped out
of its groove.
uCheck that the door seal is well fitted in the groove.
9.3.2 Features
Defect Cause Remedy
The internal light
does not come on.
The appliance is not switched on. uSwitch the appliance on.
The door was open for longer than
15 minutes.
uInterior lighting turns off automatically after approx. 15
min. with the door open.
The LED interior light is faulty or
the lid is damaged.
uContact customer service (see 9.4 Customer Services) .
The freezer
compartment
cannot be closed.*
The lock is on when the door is
open.
uUse the handle again.
9.4 Customer Services
First check if you can fix the error yourself (see 9 Customer
help) . If you can't, contact Customer Services.
Please refer to the enclosed “Liebherr-Service” brochure for
the address.
WARNING
Unprofessional repair!
Injuries.
uHave any repairs and action - not expressly specified -
on the appliance and mains cable carried out by service
personnel only. (see 8 Maintenance)
uA damaged mains cable may only be replaced by the
manufacturer, the manufacturer’s Customer Service or a
similarly qualified person.
uIn the case of appliances with an IEC connector, the
change may be made by the customer.
9.4.1 Contact Customer Services
Make sure you have the following appliance data at the
ready:
qAppliance name (model and index)
qService no. (Service)
qSerial no. (S no.)
uLook up the appliance information on the display
(see Info) .
-or-
uReferring to appliance info on the nameplate
(see 9.5 Model plate) .
uNote down the appliance information.
uNotify Customer Services of the following: Give us the
appliance data.
wThis will help us to provide you with a faster, more accu‐
rate service.
uFollow any further instructions given by Customer Serv‐
ices.
9.5 Model plate
The model plate is behind the drawers on the inside of the
appliance.
Customer help
22 * Depending on model and options
Fig. 54
(1) Appliance description (3) Serial no.
(2) Service no.
uNote the data on the model plate.
10 Shutting down
uEmpty the appliance.
uTurn off the appliance .
uRemove mains connector.
uRemove appliance connector if required: Remove and
move from left to right at the same time.
uClean the appliance (see 8.5 Cleaning the appliance) .
uLeave the door open to avoid bad smells building up.
11 Disposal
11.1 Preparing appliance for disposal
Liebherr uses batteries in some of its appli‐
ances. In the EU, for environmental reasons,
legislation obliges the end user to remove
these batteries before disposing of old appli‐
ances. If your appliance contains batteries, a
corresponding notice is attached.
Lamps If you can remove the lamps yourself without
destroying them, also remove these before
disposal.
uTake the appliance out of operation.
uAppliances with batteries: remove the batteries. For
description, see Maintenance chapter.
uIf possible: remove lamps without destroying them.
11.2 Disposing of the appliance in an
environmentally friendly manner
The appliance still contains
valuable materials and must
be disposed of separately from
unsorted municipal waste.
Dispose of batteries separately
from the old appliance. To do
this, you can return the batteries
free of charge to retailers as
well as recycling centres and
collection centres for recyclable
materials.
Lamps Dispose of removed lamps
via the respective collection
systems.
For Germany: You can dispose of the appli‐
ance free of charge via the
class 1 collection containers
at the local recycling and
recyclable material collection
centres. When purchasing a new
fridge/freezer, if the sales area
> 400 m2, retailers will also take
back the old appliance free of
charge.
WARNING
Leaking coolant and oil!
Fire. The coolant contained in the appliance is eco-friendly,
but also flammable. The oil contained in the appliance
is flammable. Escaping coolant and oil can ignite if the
concentration is high enough and in contact with an
external heat source.
uDo not damage the pipelines of the coolant circuit and
the compressor.
uTransport the appliance without damaging it.
uDispose of batteries, lamps and the appliance according
to the above specifications.
Shutting down
* Depending on model and options 23
home.liebherr.com/fridge-manuals
integrated fridge
Issue date: 20230315 Part number index: 7088250-00
Liebherr-Hausgeräte GmbH
Memminger Straße 77-79
88416 Ochsenhausen
Deutschland
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IRDe 5120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IRDe 5120 in the language / languages: English as an attachment in your email.

The manual is 4.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr IRDe 5120

Liebherr IRDe 5120 User Manual - German - 26 pages

Liebherr IRDe 5120 User Manual - Dutch - 26 pages

Liebherr IRDe 5120 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info