805345
18
Zoom out
Zoom in
Previous page
1/28
Next page
With the door open to 90°:
uSlide the baking tray onto the lower side runners.
-or-
If baking tray is uneven:
uUse the supplied support rails.
Fig. 37
uSnap support rails into the lowest runners.
With the door open to 90°:
uSlide the baking tray in on the support rails.
7.7 Adjustable bottle shelf
7.7.1 Using the bottle shelf
In the bottom of the fridge section you can either use the
variable bottle shelf or the glass panel.
Fig. 38
uRemove the glass panel and store in a safe place.
uLay bottles with their base towards the rear wall.
Note
If the bottles are protruding over the front of the bottle
shelf:
uMove the lower door rack up a place.
7.7.2 Removing the bottle shelf
You can remove the bottle shelf for cleaning.
uRemove the glass panel above the bottle shelf.
Fig. 39
uLift the bottle shelf at the front and pull out.
Note
Liebherr recommends the following:*
Do not place any goods on the drawer cover below.*
7.7.3 Inserting the bottle shelf
Fig. 40
uSlide in the bottle shelf until it engages and push down.
wThe lugs at the back of the bottle shelf are connected
automatically.
wLED comes on.
7.8 Drawers
You can remove the drawers for cleaning.
You can remove the drawers to use VarioSpace.
The way to remove/insert the drawers varies depending
on the pull-out system. Your appliance can contain various
pull-out systems.
Note
The energy consumption increases and the cooling power
goes down if ventilation is not sufficient.
uAlways leave the fan air vents clear on the back wall!
7.8.1 Drawer on telescopic rails
The drawer runs on extendible rails (telescopic rails). There
are fully extendible telescopic rails and telescopic rails with
partial pull-out. Drawers which are fully extendible can be
pulled out fully from the appliance. Drawers with partial
pull-out cannot be removed fully from the appliance. The
system in your appliance depends on the type of appliance.
Fully extendible*
If you have fully extendible rails, there is a clamp located at
the back on the left and right of the rail.
Removing drawer
Fig. 41
uPull out drawer as far as it will go.
uLift left clamp and simultaneously pull drawer forwards
on the left. Fig. 41 (1)
uLift right clamp and simultaneously pull drawer forwards
on the right. Fig. 41 (2)
uRemove drawer to the front. Fig. 41 (3)
uSlide rails in.
Inserting drawer
Features
18 * Depending on model and options
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IRBd 5181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IRBd 5181 in the language / languages: English as an attachment in your email.

The manual is 5.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr IRBd 5181

Liebherr IRBd 5181 User Manual - German - 30 pages

Liebherr IRBd 5181 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info