805326
18
Zoom out
Zoom in
Previous page
1/28
Next page
Fig. 36
uSnap support rails into the lowest runs.
When door 90° is open:
uSlide the baking tray in on the support rails.
7.8 Variable bottle shelf
7.8.1 Using the bottle shelf
Use the variable bottle shelf or the glass panel placed on
the fridge floor.
Fig. 37
uRemove the glass shelf and store separately.
uPlace the bottles with the base pointing backwards
facing the rear wall
Note
If the bottles protrude over the front of the bottle shelf:
uMove the bottom door rack higher up.
7.8.2 Removing the bottle shelf
You can remove the bottle shelf for cleaning.
uRemove the glass panel above the bottle shelf.
Fig. 38
uLift the bottle shelf at the front and pull out.
Note
Liebherr recommends the following:
Do not place any goods on the drawer cover below.
7.8.3 Inserting the bottle shelf
Fig. 39
uSlide in the bottle shelf until it engages and push down.
wThe lugs at the back of the bottle shelf are connected
automatically.
wLED lights up.
7.9 Drawers
You can remove the drawers for cleaning.
The way to remove/insert the drawers varies depending on
the pull-out system. Your appliance can contain a variety of
pull-out systems.
Note
Insufficient ventilation results in an increase in energy
consumption and reduction of the refrigerating perform‐
ance.
uNever obstruct the vents on the interior rear wall!
7.9.1 Drawer on telescopic rails
The drawer runs on full-extension rails (telescopic rails).
There are full-extension telescopic rails and telescopic rails
with partial pull-out. Drawers which are full extension can
be pulled out fully from the appliance. Drawers with partial
pull-out cannot be pulled out fully from the appliance. The
system in your appliance depends on the type of appliance.
Full extension*
If you have full-extension rails, there is a clamp located at
the back on the left and right of the rail.
Removing drawer
Fig. 40
uPull out drawer as far as it will go.
uLift left clamp and simultaneously pull drawer forwards
on the left. Fig. 40 (1)
uLift right clamp and simultaneously pull drawer forwards
on the right. Fig. 40 (2)
uRemove drawer to the front. Fig. 40 (3)
uSlide rails in.
Inserting drawer
Equipment
18 * Depending on model and options
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IRBci 5170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IRBci 5170 in the language / languages: English as an attachment in your email.

The manual is 6.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr IRBci 5170

Liebherr IRBci 5170 User Manual - German - 30 pages

Liebherr IRBci 5170 User Manual - Dutch - 30 pages

Liebherr IRBci 5170 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info