805325
19
Zoom out
Zoom in
Previous page
1/28
Next page
Fig. 41
uSlide rails in.
uPlace drawer on rails.
uSlide in drawer to the back.
wDrawer latches in audibly at the back.
Partial pull-out fridge compartment*
Removing drawer
Fig. 42
uPull out the drawer halfway. Fig. 42 (1)
uLift drawer at the front. Fig. 42 (2)
uSlide in left rail. Fig. 42 (3)
uSlide in right rail. Fig. 42 (4)
uRemove drawer to the front. Fig. 42 (5)
Fig. 43
If the rails are not yet fully pushed in after removing the
drawer:
uPush the rails in completely.
Inserting drawer
Fig. 44
uSlide rails in.
uPlace drawer on rails.
uSlide in drawer to the back.
7.10 Fruit & Vegetable-Safe cover
The compartment lid can be removed for cleaning.
7.10.1 Removing the compartment lid
Make sure that the following requirements are fulfilled
qBottle shelf is removed (see 7.8 Variable bottle shelf) .
Fig. 45
If the drawers are removed:
uPull the lid up at the front in the retaining parts to the
opening Fig. 45 (1).
uLift from the back and pull it up and out Fig. 45 (2).
7.10.2 Inserting the compartment lid
Fig. 46
If the text THIS SIDE UP is on top:
uInsert the lip of the cover over the opening of the rear
bracket Fig. 46 (1) and click into place Fig. 46 (2).
uPosition the cover where you want it (see 7.11 Humidity
control) .
7.11 Humidity control
You can regulate the moisture in the drawer yourself by
adjusting the compartment cover.
The compartment cover is on the drawer itself and can be
covered with shelves or additional drawers.
Fig. 47
Low air humidity
uOpen the drawer.
uPull the drawer cover to the front.
wIf the drawer is closed: Gap between lid and compart
ment.
uSwitch off HydroBreeze.*
wMoisture levels lower in the Safe.
High air moisture:
uOpen the drawer.
uSlide the compartment cover to the back.
wIf the drawer is closed: The cover seals the compartment.
uActivate the HydroBreeze.*
wMoisture levels rise in the Safe.
If there is too much moisture in the compartment:
uChoose a “low moisture setting”.
-or-
uRemove the moisture with a cloth.
Note
With the “low humidity” setting, the Fruit & Vegetable-Safe
can also be used as a Meat & Dairy-Safe.
uChoose a “low moisture” setting.
Equipment
* Depending on model and options 19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr IRBb 4170 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr IRBb 4170 in the language / languages: English as an attachment in your email.

The manual is 6.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr IRBb 4170

Liebherr IRBb 4170 User Manual - German - 30 pages

Liebherr IRBb 4170 User Manual - Dutch - 30 pages

Liebherr IRBb 4170 User Manual - French - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info