805415

Liebherr ICNc 5123 Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
8.1.1 Removing the FreshAir carbon filter
Fig. 56
uPull out the compartment Fig. 56 (1).
uRemove the carbon filter Fig. 56 (2).
8.1.2 Inserting the FreshAir carbon filter
Fig. 57
uInsert the carbon filter as shown in the diagram
Fig. 57 (1).
wThe carbon filter clicks into place.
If the carbon filter is pointing downwards:
uPush the compartment in Fig. 57 (2).
wThe carbon filter is now ready for use.
8.2 Disassembling / assembling pull-
out systems
8.2.1 Notes on disassembly
You can disassemble some of the pull-out systems for
cleaning. Your appliance can contain a variety of pull-out
systems.
The following pull-out systems can be disassembled or
cannot be disassembled:
Pull-out system can be disassembled /
cannot be disassembled
Drawer on appliance base or
glass shelf
cannot be disassembled
Drawer on rails cannot be disassembled
Fully extendible* cannot be disassembled*
Partial pull-out fridge compart‐
ment*
cannot be disassembled*
8.3 Defrosting the appliance
WARNING
Improper defrosting of the appliance!*
Injuries and damage.
uDo not use mechanical equipment or other methods to
speed up the defrosting process other than those recom‐
mended by the manufacturer.
uDo not use electrical heating or steam-cleaning appli‐
ances, naked flames or defroster sprays to defrost.
uDo not use sharp objects to remove ice.
8.3.1 Defrosting the fridge compartment
Defrosting is performed automatically. The water from the
thawing process drains through the outlet and evaporates.
Water drops or a thin layer of frost or ice can form on the
back wall; this is a completely normal part of the applian‐
ce’s function. This must not be removed.*
A layer of frost or ice can from briefly due to the energy-
optimised control of the device.*
A layer of frost or ice can from briefly due to the energy-
optimised control of the device.*
uClean the drain opening regularly (see 8.4 Cleaning the
appliance) .
8.3.2 Defrosting the freezer compartment with
NoFrost*
Defrosting is performed automatically with the NoFrost
system. The moisture is deposited on the evaporator, is peri‐
odically defrosted and evaporates.
The appliance does not need to be defrosted.
8.3.3 Defrosting the freezer compartment
manually*
A layer of frost or ice forms after prolonged use.
The following factors promote the formation of frost or ice:
- The appliance is opened frequently.
- Hot food is put in.
One day before defrosting:
uActivate SuperFrost (see 6.3 Functions) .
wFrozen goods have a “residual coldness”.
uSwitch off the appliance .
uPull out the mains plug or switch off the fuse.
uWrap the frozen produce in newspaper or blankets and
store in a cool place.
uPlace a pan of hot water (not
boiling) on the middle shelf.
wThis speeds up the defrosting process.
uLeave the appliance door open during defrosting.
uRemove loosened pieces of ice.
uMake sure that there is no melted ice water in the
cabinet.
uSoak up the melted ice water with a sponge or cloth
several times as necessary.
uClean the appliance (see 8.4 Cleaning the appliance) .
Maintenance
22 * Depending on model and options
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr ICNc 5123 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr ICNc 5123 in the language / languages: English as an attachment in your email.

The manual is 4.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr ICNc 5123

Liebherr ICNc 5123 User Manual - German - 30 pages

Liebherr ICNc 5123 User Manual - Dutch - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info