710304
8
Zoom out
Zoom in
Previous page
1/10
Next page
16
Defrosting
After the appliance has been in operation for some time, a layer
of frost or ice will form on the inside walls. This increases energy
consumption.
Switch on SuperFrost the day before defrosting.
Switch the appliance off to defrost. Pull out the mains plug.
Wrap the frozen food, possibly still in the freezer basket, in paper
or blankets and store in a cool place.
Remove the plug from the
drain opening. Remove the
dividing wall or freezer tray
and place underneath the ap-
pliance so that the defrosted
water escapes through the
drain opening into the divid-
ing wall or the freezer tray.
Leave the lid open while
defrosting. After defrosting
mop up the remaining water
and clean the appliance.
Do not use any mechanical devices or other
articial aids for defrosting other than those
recommended by the manufactur er.
Cleaning
A failure to follow these instructions may result in the food being
spoilt.
Before cleaning, always disconnect the appliance
from the mains. Pull out the plug or switch o the
fuse.
Surfaces which may come into contact with food
and accessible drain systems must be cleaned at
regular intervals.
If the door is left open for a lengthy period, the
temperature in the appliance's compartments may
rise dramatically.
Clean the inside, equipment parts and outer walls with lukewarm
water and a little detergent. Do not use chemical solvents or any
cleaning agents containing sand or acid.
Use a glass cleaner to clean the glass surfaces and a commercially
available stainless-steel cleaning agent for the stainless-steel
surfaces.
CAUTION
Risk of damage to the appliance components and
risk of injury due to hot steam.
Do not use steam cleaning equipment to clean
the appliance.
Ensure that no cleaning water penetrates into the electrical
components or ventilation grille.
Dry all parts well with a cloth.
The ventilation grilles should be cleaned regularly. Dust deposits
increase energy consumption. Ensure that none of the wires or
other components are dislodged, bent or damaged.
Do not damage or remove the type plate on the inside of the
appliance. It is very important for servicing purposes.
If the appliance is left empty for a lengthy period, it must be
switched o, defrosted, cleaned and dried and the door is to be
left open to prevent mould formation.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GT 6122-21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GT 6122-21 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GT 6122-21

Liebherr GT 6122-21 User Manual - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info