590230

Liebherr GP1486-20 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
u
Check the electrical connection.
u
Plug in the power plug.
4.7 Switching on the appliance
u
Press the On/Off button
Fig. 3 (1)
.
w
The appliance is switched on. The temperature display and
Alarm symbol
Fig. 3 (6)
flash until the temperature is cold
enough.
w
If “DEMO” is displayed, demo mode is activated. Please
contact the after sales service.
5 Control
5.1 Brightness of the temperature
display
You can adjust the brightness of the temperature display to the
light conditions of the room in which the appliance is installed.
5.1.1 Setting the brightness
The brightness is adjustable between h 0 (minimum bright-
ness) and h 5 (maximum brightness).
u
Activate setting mode by pressing the SuperFrost button,
Fig. 3 (4)
, for approx. 5 sec.
w
The Menu symbol is shown on the display,
Fig. 3 (7)
.
w
c flashes on the display.
u
Use the adjustment button,
Fig. 3 (2)
, to select h.
u
Briefly confirm with the SuperFrost button,
Fig. 3 (4)
.
w
The display shows the last set brightness value.
u
Use the adjustment button,
Fig. 3 (2)
, to set the desired
value from h 0 to h 5.
u
Briefly confirm the newly set brightness value with the
SuperFrost button
Fig. 3 (4)
.
w
h flashes on the display.
w
The brightness is set.
u
After making the change, deactivate setting mode: Press the
On/Off button
Fig. 3 (1)
once.
w
The temperature display shows the temperature again.
If setting mode is already activated but you would like to keep
the old brightness value setting:
u
Press the On/Off button
Fig. 3 (1)
twice to deactivate setting
mode.
w
The temperature display shows the temperature again.
5.2 Child proofing
The child-proofing function enables you to make
sure that the appliance is not inadvertently switched
off by playing children.
5.2.1 Setting the child lock
To switch on the function:
u
Activate setting mode: press the SuperFrost button
Fig. 3 (4)
for approx. 5 seconds.
w
The Menu symbol
Fig. 3 (7)
is shown on the display.
w
c flashes on the display.
u
Briefly confirm with the SuperFrost button,
Fig. 3 (4)
.
w
c1 appears in the display.
u
Briefly confirm with the SuperFrost button,
Fig. 3 (4)
.
w
The child lock symbol
Fig. 3 (8)
, lights up on the
display.
w
c flashes on the display.
w
The child lock function is switched on.
If setting mode is to be terminated:
u
Briefly press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The temperature display shows the temperature again.
To switch off the function:
u
Activate setting mode: press the SuperFrost button
Fig. 3 (4)
for approx. 5 seconds.
w
The Menu symbol
Fig. 3 (7)
is shown on the display.
w
c flashes on the display.
u
Briefly confirm with the SuperFrost button,
Fig. 3 (4)
.
w
c0 appears in the display.
u
Briefly confirm with the SuperFrost button,
Fig. 3 (4)
.
w
The child lock symbol
Fig. 3 (8)
goes out.
w
c flashes on the display.
w
The child lock function is switched off.
If setting mode is to be terminated:
u
Briefly press the On/Off button
Fig. 3 (1)
.
-or-
u
Wait for 5 minutes.
w
The temperature display shows the temperature again.
5.3 Temperature alarm
The audible alarm sounds if the freezer temperature
is not cold enough.
The temperature display and the alarm symbol
Fig. 3 (6)
flash at the same time.
The cause of the temperature being too high may be:
-
warm fresh food was placed inside
-
too much warm ambient air flowed in when rearranging and
removing food
-
Prolonged power outage
-
the appliance is faulty
The audible alarm is automatically silenced, the alarm symbol
Fig. 3 (6)
goes out and the temperature display stops flashing
when the temperature is sufficiently cold again.
If the alarm status persists: (see 7 Malfunctions) .
Note
Food may be spoilt if the temperature is not cold enough.
u
Check the quality of the food. Do not consume spoiled food.
5.3.1 Muting the temperature alarm
The audible alarm can be muted. When the temperature is
sufficiently cold again, the alarm function is active again.
u
Press alarm button
Fig. 3 (9)
.
w
The audible alarm is silenced.
5.4 Freezing food
The rating plate indicates the maximum quantity of fresh food
you can freeze within 24 hours (see 1 Appliance at a glance)
under “Freezing capacity ... kg/24h”.
Each drawer can hold a max. of 25 kg of frozen food.
The shelves can each be loaded with 35 kg of frozen food.
Control
* Depending on model and options 7
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GP1486-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GP1486-20 in the language / languages: English as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GP1486-20

Liebherr GP1486-20 User Manual - English - 12 pages

Liebherr GP1486-20 User Manual - German - 12 pages

Liebherr GP1486-20 User Manual - Dutch - 12 pages

Liebherr GP1486-20 User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info