112058

Liebherr GP 1366 Manual

12
Zoom out
Zoom in
Previous page
1/14
Next page
Defect Cause Remedy
Vibration noises →The appliance is not standing
firmly on the floor. As a result
objects and adjacent units start
to vibrate when the refrigerator is
running.
uAlign the appliance using the adjustable feet.
The temperature
display indicates:
F0 to F5.
→ There is a fault. uPlease contact the after-sales service (see 6 Mainte‐
nance) .
Power failure
flashes in
the temperature
display . The
highest tempera‐
ture reached
during power
failure is indicated
in the temperature
display.
→The freezer temperature rose too
high over the last hours or days
due to a power failure or power
interruption. When the power inter‐
ruption is over, the appliance will
continue to operate in the last
temperature setting.
uTo cancel the display of the warmest temperature: press
alarm button Fig. 3 (9).
uCheck the quality of the food. Do not consume spoiled
food. Do not re-freeze thawed food.
DEMO shines in
the temperature
display.
→ The demo mode is activated. uPlease contact the after-sales service (see 6 Mainte‐
nance) .
The outer surfaces
of the appliance
are warm*.
→The heat of the refrigeration circuit
is used to prevent condensate from
forming.
uThis is normal.
The temperature is
not cold enough.
→The door of the appliance is not
properly closed.
uClose the door of the appliance.
→ Insufficient ventilation. uKeep ventilation grille clear, and clean it.
→The ambient temperature is too
high.
uSolution: (see 1.2 Appliance range of use) .
→The appliance was opened too
frequently or for too long.
uWait to see whether the appliance reaches the required
temperature by itself. If not, please contact the after
sales service (see 6 Maintenance) .
→Too much fresh food was placed
inside without SuperFrost.
uSolution: (see 5.7 SuperFrost)
→ The temperature is incorrectly set. uSet the temperature to a colder setting and check after
24 hours.
→The appliance is too close to a
source of heat (stove, heater etc).
uChange the position of the appliance or the source of
heat.
Dashes (“- -”) are
shown on the
display.
→The freezing temperature has risen
above zero degrees because of a
power cut or power interruption.
uSee also "Power failure" and " "
Concentrated
collection of ice
on inside face at
centre of appliance
cover.
→This build-up of ice is normal. Due
to physical properties, ice concen‐
trates inside the top of the appli‐
ance.
uRemove the ice with a scraper tool.
8 Decommissioning
8.1 Switching off the appliance
uPress the On/Off button Fig. 3 (1) until the display goes
dark. Release button.
wIf the appliance cannot be switched off, the child lock
function is active (see 5.2 Child proofing) .
8.2 Taking the appliance out of service
uEmpty the appliance.
uSwitch off the appliance (see 8 Decommissioning) .
uRemove mains connector.
uClean the appliance (see 6.2 Cleaning the appli‐
ance) .
uLeave the door open to prevent odour.
Decommissioning
12 * Depending on model and options
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GP 1366 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GP 1366 in the language / languages: English as an attachment in your email.

The manual is 1.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GP 1366

Liebherr GP 1366 User Manual - German - 14 pages

Liebherr GP 1366 User Manual - Dutch - 5 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info