715382
9
Zoom out
Zoom in
Previous page
1/24
Next page
Fig. 10
u
Undo the soft stop mechanism screw with a T15 screwdriver
approx. 14 mm.
Fig. 10 (1)
u
Insert a screwdriver behind the soft stop mechanism on the
handle side and rotate forwards.
Fig. 10 (2)
u
Remove the soft stop mechanism.
Fig. 10 (3)
4.3.2 Remove the door
For appliances without a soft top mechanism:*
Fig. 11
*
u
Open the door.*
NOTICE
Risk of damage!*
If the door seal is damaged, the door may fail to close properly
and the cooling will be inadequate.
u
Do not damage the door seal with the screwdriver!
u
Remove the outer cover.*
Fig. 11 (1)
u
Disengage and release the bearing bracket cover. Remove
the bearing bracket cover.*
Fig. 11 (2)
u
Unlatch the panel with a slotted screwdriver and swivel it to
one side.*
Fig. 11 (3)
For all appliances:*
Fig. 12
CAUTION
Risk of injury if the door tips!
u
Take good hold of the door.
u
Set down the door carefully.
u
Carefully remove the protective cover.
Fig. 12 (1)
u
Undo the bolt a little with a T15 screwdriver.
Fig. 12 (2)
u
Hold the door and remove the bolts with your fingers.
Fig. 12 (3)
u
Pull the bearing bush out of the guide. Insert from the other
side and click into place.
Fig. 12 (4)
u
Lift the door and set it aside.
u
Carefully lift the plugs out of the door bearing bush with a
slotted screwdriver and remove.
Fig. 12 (5)
4.3.3 Moving the upper bearing parts to the
other side
For all appliances:*
Putting into operation
* Depending on model and options 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GNi 4335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GNi 4335 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GNi 4335

Liebherr GNi 4335 User Manual - German - 28 pages

Liebherr GNi 4335 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info