715374
14
Zoom out
Zoom in
Previous page
1/24
Next page
Fig. 27
For 600 mm wide appliances:*
a* b* c* d* G*
~ 1800 mm ~ 1400 mm ~ 2100 mm ~ 200 mm Appliance
plugs
For 700 mm wide appliances:*
a* b* c* d* G*
~ 1750 mm ~ 1350 mm ~ 2100 mm ~ 200 mm Appliance
plugs
Ensure that the following conditions are met:
- The type of current and voltage at the installation site corre-
spond to the information on the model plate (see 1 Appli-
ance at a glance) .
- The socket is earthed according to the regulations and
fused.
- The fuse tripping current is between 10 and 16 A.
- The socket is easily accessible.
- The socket is outside the back of the appliance area in the
specified area
Fig. 27 (a, b, c)
.
u
Check the electrical connection.
u
Insert the appliance plug
Fig. 27 (G)
into the back of the
appliance. Ensure that it clicks into place.
u
Connect the power plug to the power supply.
w
The Liebherr logo appears on the screen.
w
The display switches to the standby symbol.
4.6 Switching on the appliance
Note
If the appliance is in demo mode, DEMO appears on the home-
screen.
u
Disable demo mode (see 7 Malfunctions) .
Note
The manufacturer recommends:
u
Store frozen produce at -18 °C or colder.
Connect and switch on appliance approx. 2 hours before
loading for the first time.
4.6.1 Switch on appliance
If the standby symbol is displayed over the whole screen:
u
Press the standby symbol.
w
The appliance is switched on. The display switches to the
home screen.
w
The appliance sets itself to the displayed temperature. This
is shown by down arrows.
If the standby symbol is displayed in the freezer compart-
ment field:
u
Press the standby symbol.
w
The appliance is switched on.
w
The appliance sets itself to the displayed temperature. This
is shown by down arrows.
If the screen is black:
u
Touch the screen.
w
The standby symbol appears on the whole screen.
u
Press the standby symbol.
w
The appliance is switched on. The display switches to the
home screen.
w
The appliance sets itself to the displayed temperature. This
is shown by down arrows.
4.7 SmartDeviceBox
SmartDeviceBox: Start-up instruc-
tionswww.smartdevice.liebherr.com/install
If the SmartDevice box (SDB) is inserted correctly the menu
below appears. The device is supplied with WLAN activated.
To use more WiFi options,
open the WIFI menu.
Fig. 28
u
Press WIFI.
w
The WIFI menu opens.
Turning on/off WiFi
Fig. 29
u
Use the slider at the bottom right to turn on/off WIFI
w
Slider to OFF = WIFIis disabled.
w
Slider to ON = WIFIis enabled.
WIFI INFO
Call up the status of the
SmartDevice box.
Fig. 30
u
Press the OK button.
w
The WIFI INFO screen opens.
w
The following statuses
can be displayed:
Fig. 31
w
SSID: ***WPS*** = The SmartDevice box is in WPS mode
for 3 minutes. An automatic connection to the SmartDevice
box can be established via the router.
w
SSID: LHSDB_xxxxxxxxx = the SmartDevice box is in
manual connection mode for 30 minutes. The SmartDe-
vice box transmits a private network to which you can
connect to send WLAN data.
w
SSID: empty = The SmartDevice box is in sleep mode.
Please reset the WIFI and connect your SmartDevice box
to the home network.
w
SSID: TP-LINK_2D43A2 or Fritz!Box7069 = The SmartDe-
vice box is connected to the home network.
WIFI RESET
Putting into operation
14 * Depending on model and options
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GN 3235 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GN 3235 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr GN 3235

Liebherr GN 3235 User Manual - German - 28 pages

Liebherr GN 3235 User Manual - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info