597544
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
Dimensions
Setting up
Avoid positioning the appliance in direct sunlight or near cookers,
radiators and similar sources of heat.
The floor on which the appliance stands should be horizontal and
level. Compensate for uneven floors with the adjustable feet. The
appliance can be placed with its back flush to the wall.
The ventilation grilles should not be obstructed. Always ensure
that there is good ventilation and that the outward flowing air is
able to escape.
Do not place heat-emitting appliances, e.g. microwave oven,
toaster, etc., on top of the freezer.
Connecting to the mains
Power supply (a.c.) and voltage at the operating point must comply
with the details on the type plate. The socket must be fused with a
10 A fuse or higher, it must be away from the rear of the appliance
and must be easily accessible.
Connect the appliance with a properly earthed fused plug
and socket only.
Do not connect the appliance to the supply
with other equipment using an extension
cable. This can cause the extension socket
to overheat.
GB
Operating and control elements
ON / OFF button
+ Temperature buttons
Set button (Enter)
Compressor is running
LED ashing - refrigeration unit switches on after a delay. The
compressor will start automatically after the pressure in the
refrigerant circuit has equalised.
Alarm function
Switching the appliance on and o
Connect the appliance to the mains - the appliance is switched on.
To switch the appliance o: Keep the ON/OFF button
pressed for approx. 3 seconds - the display reads OFF.
To switch the appliance on: Keep the ON/OFF button
pressed for approx. 5 seconds - the display reads ON.
Setting the temperature
Press button for 1 second. The temperature display ashes.
To increase the temperature (warmer): press button
.
To reduce the temperature (colder): press button
.
Press button
again.
The desired temperature setting is saved.
The temperature can be set at between -14°C and -26°C.
Storage
The appliance is suitable for storing ice cream and ready-frozen
foods. The grid shelves can be moved to accommodate dierent
height packages. Instead of the shelves, standard gastronomic
trays can also be inserted in the support rails.
Depending on the height of the
goods to be stored, you can
adjust the position of the sup-
port rails in intervals of 27,5 mm.
First slide bars into the rear
clip-in upright at the desired
height and then hang in position
at the front.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr GG 55511 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr GG 55511 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info