805275
6
Zoom out
Zoom in
Previous page
1/14
Next page
NOTICE
Covered vents!
Damage. Appliance can overheat, which can reduce the
service life of various parts of the appliance and lead to
operational impairments.
uAlways make sure there is good ventilation.
uAlways keep vents or ventilation grids in the appliance
housing and in the kitchen furniture (fully integrated
appliance) unobstructed.
NOTICE
Risk of damage due to condensate!
uDo not install the appliance directly alongside a further
refrigerator/freezer.
qBefore you connect the appliance, report any damage
immediately to the delivery company.
qThe floor of the installation site must be horizontal and
even.
qDo not install the appliance in direct sunlight, next to an
oven, radiator or similar.
qThe best place for installation is a dry and well ventilated
room.
qInstall the appliance with the rear panel up against the
wall and always use the supplied wall spacers (see
below).
qOnly ever move the appliance when it is empty.
qThe surface supporting the appliance must be at the
same level as the surrounding floor.
qDo not install the appliance on your own.
qThe more refrigerant there is in the appliance, the larger
the space that it is installed in must be. If the space is
too small, any leak may create a flammable mixture of
gas and air. For every 8 g of refrigerant, the installation
space must be at least 1 m3. Information regarding the
coolant can be found on the type plate inside the appli‐
ance.
uDetach the connecting cable from the rear of the appli‐
ance, removing the cable holder at the same time
because otherwise there will be vibratory noise!
uRemove all transit supports.
To achieve the specified energy consumption, use the
spacers, which are supplied with some appliances. This
increases the appliance depth by approx. 35 mm. The
appliance will work properly without the spacers but will
consume slightly more energy.
uIn the case of an appliance with
enclosed wall spacers, mount
the wall spacers on the back
of the appliance at the top left
and right.
uDispose of packaging material (see 4.5 Disposing of
packaging) .
uAlign the appliance so that it
stands firmly and on a level
by applying the accompa‐
nying spanner to the adjust
able-height feet (A) and
using a spirit level.
Note
uClean the appliance (see6.2Cleaning the appliance) .
If the appliance is installed in a very damp environment,
condensate may form on the outside of the appliance.
uAlways see to good ventilation at the installation site.
4.3 Changing over the door hinges
You can change over the door hinges if necessary.
Make sure that the following tools are at hand:
qTorx® 20
qTorx® 15
qSupplied open-ended wrench
qIf necessary, a second person to assist with installation
CAUTION
Risk of injury if the door tips!
uTake good hold of the door.
uSet down the door carefully.
Fig.4 On appliances with a door handle
Putting into operation
6 * Depending on model and options
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr G1223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr G1223 in the language / languages: English as an attachment in your email.

The manual is 1.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr G1223

Liebherr G1223 User Manual - German - 14 pages

Liebherr G1223 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info