805266

Liebherr FNe 5026 Manual

21
Zoom out
Zoom in
Previous page
1/26
Next page
Fig. 52
uPress all lugs Fig. 52 (1) in succession and remove the lid
Fig. 52 (2).
uClean the ice cube drawer, water tank and EasyTwist-Ice
with warm water and a little detergent.
uAssemble the EasyTwist-Ice.
Fig. 53
uPush the axles Fig. 53 (1) on the EasyTwist-Ice into the
guides and push the rear side Fig. 53 (2) until the lugs
engage.
uPush in the EasyTwist-Ice drawer.
WARNING
Impure water!
Poisoning.
uOnly fill with potable water.
uFill the water tank with water and insert it.
(see 7.4.1 Filling the water tank)
With non-filtered water:
uDispose of any ice cubes that were made within 24 hours
of the first ice cubes that were produced.
With filtered water:
uDispose of any ice cubes that were made within 48 hours
of the first ice cubes that were produced.
8.3.6 Cleaning the IceMaker*
There are various options for cleaning the IceMaker.
Cleaning is required in the following cases:
qInitial operation
qIf out of use for more than 5 days.*
Ensure that the following conditions are met:
qIceMaker drawer is emptied.
qIceMaker drawer is in place.
qThe IceMaker is activated. (see 6.2 Control concept)
First use or after a long period of non-use
Clean the IceMaker with the TubeClean function.
uPlace a 1.5 l empty container (max. height 10 cm) into the
drawer under the IceMaker.
uActivate the TubeClean function. (see 6.2 Control
concept)
wThe rinse process is prepared (max. 60 min.): Symbol
flashes.
wWater pipes are rinsed: Symbol flashes.
wRinsing process is complete: Function turns off automati‐
cally.
uRemove the IceMaker drawer and remove the container.
uClean the IceMaker drawer with warm water and a little
detergent.
uPush the IceMaker drawer in.
wThe system starts making ice cubes automatically.
uDispose of any ice cubes that were made 24 hours after
the first ice cubes.
If cleaning is required
Clean the IceMaker by hand.
uRemove the IceMaker drawer and clean with warm water
and a little detergent.
uPush the IceMaker drawer in.
wThe system starts making ice cubes automatically.
8.3.7 After cleaning
uWipe the appliance and the components dry.
uConnect and switch on the appliance.
uActivate SuperFrost (see 6.3 Functions) .
The temperature is cold enough:
uPlace the food inside.
uRepeat cleaning regularly.
9 Customer help
9.1 Technical specifications
Temperature range
Freeze -28 °C to -15 °C
Maximum freezer quantity / 24 hrs
Freezer compart‐
ment
See the type plate under “Freezer
goods … /24 hours”
Maximum component capacity
Features Appliance
width
550 mm
(see instal‐
lation
instruc‐
tions,
appliance
dimen‐
sions)
Appliance
width
600 mm
(see
installa‐
tion
instruc‐
tions,
appliance
dimen‐
sions)
Appliance
width
700 mm
(see instal‐
lation
instruc‐
tions, appli‐
ance
dimen‐
sions)
Drawer on moulded
rib
(see 7.1.2 Drawer
on moulded rib)
14 kg 19 kg 19 kg
Bottom drawer
(see 7.1.3 Bottom
drawer)
-- 11 kg 19 kg
Customer help
* Depending on model and options 21
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr FNe 5026 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr FNe 5026 in the language / languages: English as an attachment in your email.

The manual is 6.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr FNe 5026

Liebherr FNe 5026 User Manual - German - 24 pages

Liebherr FNe 5026 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info