805264
17
Zoom out
Zoom in
Previous page
1/26
Next page
7.3.1 Removing / inserting the glass shelf
Make sure that the following requirements are fulfilled:
qGlass shelf under the drawer: The drawer has been
removed. (see 7.1 Drawers)
qPull-out board under IceTower: IceTower has been
removed. (see 7.2 Pull-out board with IceTower*) *
Removing glass shelf
Fig. 36 Example illustration of glass shelf
uLift glass shelf at the front. Fig. 36 (1)
uTake out glass shelf to the front. Fig. 36 (2)
Inserting glass shelf
Fig. 37 Example illustration of glass shelf
uPosition glass shelf at an angle behind the stoppers. (see
Fig. 91)
uLower glass shelf.
uSlide in glass shelf to the back.
7.4 EasyTwist-Ice*
The EasyTwist-Ice produces ice cubes when the water tank
is inserted.
The EasyTwist-Ice is solely intended for the production of
ice cubes for in standard household amounts.
Note
Do not change the position of the EasyTwist-Ice.
Ensure that the following conditions are met:
-The EasyTwist-Ice has been cleaned (see 8.3.5 Cleaning
the EasyTwist-Ice*)
-The water tank has been cleaned.
-The EasyTwist-Ice drawer is fully inserted.
7.4.1 Filling the water tank
WARNING
Impure water!
Poisoning.
uOnly fill with potable water.
NOTICE
Sugar-content liquids!
Damage to EasyTwist-Ice.
uOnly fill with cold drinking water.
Note
Using filtered, decarbonised water ensures the best-tasting
drinking water for your ice cubes.
This water quality can be achieved using a table water filter
of the kind available in trade retail outlets.
uAlways fill the water tank only with filtered, decarbonised
drinking water.
The EasyTwist-Ice is supplied with water from the water
tank.
Fig. 38
uLift up the water tank at the rear Fig. 38 (1) and remove to
the top Fig. 38 (2).
uFill with drinking water up to the marking.
uInsert the water tank by reversing the steps described
above.
7.4.2 Producing ice cubes
The production volume depends on the freezer temperature.
The colder the temperature, the more ice cubes that can be
produced in a certain period.
Maximum capacity of the ice cube drawer – 40 cubes (2x ice
cube production).
Time required for ice cube production – at least 5 hours.
Releasing the ice cubes
uTurn the knob to the right up to its stop limit.
uIf necessary, repeat this step several times and turn the
knob a little more.
7.5 IceMaker*
The IceMaker will produce ice cubes for household use only.
Ensure that the following conditions are met:
-IceMaker is cleaned (see 8 Maintenance) .
-IceMaker drawer is cleaned.
-IceMaker drawer is fully inserted.
7.5.1 Producing ice cubes
The volume depends on the freezing temperature. The
colder the temperature, the more ice cubes the system can
produce in a certain time period.
After the IceMaker is turned on for the first time, it can take
up to 24 hours for the first ice cubes to be made.
uActivate the IceMaker function (see 6.2 Control concept) .
Features
* Depending on model and options 17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr FNe 4224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr FNe 4224 in the language / languages: English as an attachment in your email.

The manual is 6.44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr FNe 4224

Liebherr FNe 4224 User Manual - German - 24 pages

Liebherr FNe 4224 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info