597630
9
Zoom out
Zoom in
Previous page
1/18
Next page
EN
= Lower hinge heating control
If condensed water appears in the
lower hinge area or on the base plate
between refrigerator and freezer
compartment, increase the output
of the heating located behind the
base plate.
The factory setting is set to =
medium output.
Changing the heating output
Activate setup mode by touching
the SuperFrost icon for 5 sec-
onds.
Touch the freezer compartment
Down icon until appears in the display.
Touch the SuperFrost icon.
- The display reads
Touch the freezer compartment
Up/Down icons to select
= at slight condensation
= at heavy condensation
= heating off
Touch the SuperFrost icon at the desired value.
Exit setup mode by touching the freezer compartment On/Off
icon.
Note
With normal ambient conditions no condensation will appear. With
high humidity and low ambient temperature this feature helps to
prevent condensation.
= Display brightness
Adjusting the display brightness
Activate setup mode by touching the SuperFrost icon for
5 seconds.
Touch the freezer compartment Down icon until appears in
the display.
Touch the SuperFrost icon.
- The display reads
Touch the freezer compartment
Up/Down icons to select
0 = minimum to
5 = maximum brightness.
Touch the SuperFrost icon at the desired value.
Exit setup mode by touching the freezer compartment On/Off
icon.
= Ice maker vacation state
See section entitled "Ice maker".
= Water quantity for ice cube tray
If the produced ice cubes of the ice maker are too small, the
inflowing water quantity can be adjusted.
Adjusting the water quantity
Activate setup mode by touching the SuperFrost icon for
5 seconds.
Touch the freezer compartment Down icon until appears in
the display.
Touch the SuperFrost icon.
- The display reads
Touch the freezer compartment Up icon once only so that E 4
appears in the display.
Caution!
Do not increase for more than one step. If the adjusted value
is too high, the ice cube tray of the ice maker could overflow.
Touch the SuperFrost icon again.
Exit setup mode by touching the freezer compartment On/Off
icon.
Check the ice cube size within the next days. If the ice cubes are
still too small, follow the steps above again.
= Set BioFresh temperature
The temperature in the BioFresh drawers may be changed.
Setting the BioFresh temperature
Activate setup mode by touching the SuperFrost icon for
5 seconds.
Touch the freezer compartment Down icon until appears in
the display.
Touch the SuperFrost icon.
- The display reads
Touch the freezer compartment Up/Down icons
and set
6 - 9 to increase the temperature (warmer),
4 - 1 to reduce the temperature.
CAUTION!
For values b4 - b1, the temperature in the drawers can
drop to below 0°C. Food may freeze.
Touch the SuperFrost icon at the desired value.
Exit setup mode by touching the freezer compartment On/Off
icon.
25
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr ECBN 6156 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr ECBN 6156 in the language / languages: English as an attachment in your email.

The manual is 2.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr ECBN 6156

Liebherr ECBN 6156 User Manual - German - 18 pages

Liebherr ECBN 6156 Installation Guide - Dutch - 11 pages

Liebherr ECBN 6156 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info