Manual Liebherr CUb 2331 (page 6 of 12) (English)

804837

Zoom out

Zoom in

1/12

uAlign the appliance so that it

stands firmly and on a level by

applying the accompanying

spanner to the adjustable-

height feet (A) and using a

spirit level.

uThen support the door:

Extend the adjustable foot at

the turn hinge (B) until it rests

on the floor and then make a

further 90° turn.

Note

uClean the appliance (see 6.2 Cleaning the appliance) .

If the appliance is installed in a very damp environment,

condensate may form on the outside of the appliance.

uAlways see to good ventilation at the installation site.

4.3 Changing over the door hinges

You can change over the door hinges if necessary.

Ensure that the following tools are to hand:

qTorx® 15

qTorx® 25

qScrewdriver

qCordless screwdriver, if necessary

qSecond person for fitting work, if needed

4.3.1 Detaching the upper door

Note

uRemove any food from the door racks before removing the

door, so that no food falls out.

Fig. 5

uPull off the cover

Fig. 5 (1)

forwards and upwards.

uLift off the cover

Fig. 5 (2)

CAUTION

Risk of injury if the door tips!

uTake good hold of the door.

uSet down the door carefully.

uUnscrew the upper turn hinge

Fig. 5 (3)

(2x Torx® 25)

Fig. 5 (4)

and lift it off.

uLift up the upper door and set it aside.

4.3.2 Detaching the lower door

uOpen the lower door.

CAUTION

Risk of injury if the door tips!

uTake good hold of the door.

uSet down the door carefully.

uUnscrew the fastening screws

Fig. 6 (11)

(2 x Torx® 25) and

pull the centre bearing block out of the lower door.

uRemove plastic washer

Fig. 6 (10)

uLift up the door and set it aside.

4.3.3 Transferring the middle bearing elements

Fig. 6

uRemove the cover

Fig. 6 (12)

carefully.

uRe-install the cover

Fig. 6 (12)

on the opposite side.

4.3.4 Transferring the lower bearing elements

Fig. 7

uUnscrew fastening screws

Fig. 7 (21)

uRemove the lower bearing block

Fig. 7 (23)

, complete with

bearing bolt

Fig. 7 (24)

, washer

Fig. 7 (26)

and adjustable

foot

Fig. 7 (22)

uUnscrew the bearing bolt

Fig. 7 (24)

, complete with washer

Fig. 7 (26)

, re-locate it into the mounting hole on the oppo-

site side of the bearing block and tighten again.

uCarefully remove the cover plate

Fig. 7 (25)

and re-locate it

to the other side.

uFasten the lower bearing block

Fig. 7 (23)

, complete with

bearing bolt

Fig. 7 (24)

, washer

Fig. 7 (26)

and adjustable

foot

Fig. 7 (22)

to the new hinge side, with the help of a cord-

less screwdriver if necessary, and tighten (with 4 Nm)

once again.

4.3.5 Fitting the lower door

uLower the bottom door onto the bearing bolt

Fig. 7 (24)

uClose the door.

uInsert the centre bearing block

Fig. 6 (13)

turned through

180° into the lower door and fasten firmly (with 4 Nm)to the

new hinge side with the fastening screws(2 x Torx® 25).

uRefit plastic washer

Fig. 6 (10)

Putting into operation

6 * Depending on model and options

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CUb 2331 in the language / languages: English as an attachment in your email.

The manual is 0.58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CUb 2331

Liebherr CUb 2331 User Manual - German - 14 pages

Liebherr CUb 2331 User Manual - Dutch - 16 pages

Liebherr CUb 2331 User Manual - French - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr CUb 2331 Manual

Product: