805531
23
Zoom out
Zoom in
Previous page
1/26
Next page
Defect Cause Remedy
The appliance
builds up too much
ice or condensa‐
tion.
The door seal may have slipped out
of its groove.
uCheck that the door seal is well fitted in the groove.
The appliance is
hot to touch on the
outside*.
The heat of the refrigeration circuit
is used to avoid condensation.
uThis is normal.
9.3.2 Features
Defect Cause Remedy
The internal light
does not come on.
The appliance is not switched on. uSwitch the appliance on.
The door was open for longer than
15 minutes.
uInterior lighting turns off automatically after approx. 15
min. with the door open.
The LED interior light is faulty or
the lid is damaged.
uContact customer service (see 9.4 Customer Services) .
9.4 Customer Services
First check if you can fix the error yourself (see 9 Customer
help) . If you can't, contact Customer Services.
Please refer to the enclosed “Liebherr-Service” brochure for
the address.
WARNING
Unprofessional repair!
Injuries.
uHave any repairs and action - not expressly specified -
on the appliance and mains cable carried out by service
personnel only. (see 8 Maintenance)
uA damaged mains cable may only be replaced by the
manufacturer, the manufacturers Customer Service or a
similarly qualified person.
uIn the case of appliances with an IEC connector, the
change may be made by the customer.
9.4.1 Contact Customer Services
Make sure you have the following appliance data at the
ready:
qAppliance name (model and index)
qService no. (Service)
qSerial no. (S no.)
uLook up the appliance information on the display
(see Info) .
-or-
uReferring to appliance info on the nameplate
(see 9.5 Model plate) .
uNote down the appliance information.
uNotify Customer Services of the following: Give us the
appliance data.
wThis will help us to provide you with a faster, more accu‐
rate service.
uFollow any further instructions given by Customer Serv‐
ices.
9.5 Model plate
The model plate is behind the drawers on the inside of the
appliance.
Fig. 51
(1) Appliance description (3) Serial no.
(2) Service no.
uNote the data on the model plate.
10 Shutting down
uEmpty the appliance.
uTurn off the appliance .
uRemove mains connector.
uRemove appliance connector if required: Remove and
move from left to right at the same time.
uClean the appliance (see 8.4 Cleaning the appliance) .
uLeave the door open to avoid bad smells building up.
11 Disposal
11.1 Preparing appliance for disposal
Liebherr uses batteries in some of its appli‐
ances. In the EU, for environmental reasons,
legislation obliges the end user to remove
these batteries before disposing of old appli‐
ances. If your appliance contains batteries, a
corresponding notice is attached.
Shutting down
* Depending on model and options 23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CNsff 5704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CNsff 5704 in the language / languages: English as an attachment in your email.

The manual is 6.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CNsff 5704

Liebherr CNsff 5704 User Manual - German - 26 pages

Liebherr CNsff 5704 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info