804829

Liebherr CNsfd 5223 Manual

20
Zoom out
Zoom in
Previous page
1/26
Next page
Fig. 44
uHold the rear panel with both hands at the bottom and
pull downward vigorously at the same time.
uPull the rear panel out to the front by the bottom end.
wThe rear panel has been removed.
If you want to continue operating the appliance with the
rear panel removed:
uSet the D-Value to D2. (see D-Value*)
Inserting the rear panel
Fig. 45
uMake sure the appliance is completely empty.
uSlide in the rear panel from below to the top.
uPress back vigorously on the left-hand side of the rear
panel.
wThe rear panel clicks into place.
uInsert the equipment parts.
uSet the D-Value to D1. (see D-Value*)
8.4.5 Clean the components
NOTICE
Improper cleaning!
Damage to the appliance.
uOnly use soft cleaning cloths and ph-neutral all-purpose
cleaners.
uDo not uses abrasive sponges or steel wool which may
cause scratches.
uDo not use any sharp or abrasive cleaning agents, nor
any that contain sand, chloride or acid.
Clean with a soft, clean cloth, lukewarm water and some
detergent:
- Door rack
- Shelf
- Dividing shelf*
- VarioSafe*
- EasyFresh-Safe cover
- Drawer
Wash in the dishwasher up to 60 °C:
- Bottle rack
- Holder of the dividing shelf*
- Ice cube tray*
uTo disassemble components: see the relevant section.
uClean the components.
8.4.6 Cleaning the EasyTwist-Ice*
Cleaning is required in the following cases:
qInitial operation
qDisuse for more than 48 hours
qThe appliance requires cleaning.
In the case of initial operation, longer periods of disuse or
the appliance requiring cleaning
Fig. 46
uTake out the water tank Fig. 46 (1) and ice cube drawer
Fig. 46 (2).
uTake out the freezer drawer with EasyTwist-Ice.
Fig. 47
uPress the lug Fig. 47 (1), lift up the EasyTwist-Ice at the
rear and take it out of the freezer drawer.
Fig. 48
uPress the lugs Fig. 48 (1) on both sides of the EasyTwist-
Ice simultaneously and take off the lid Fig. 48 (2) to the
top.
Maintenance
20 * Depending on model and options
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CNsfd 5223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CNsfd 5223 in the language / languages: English as an attachment in your email.

The manual is 6.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CNsfd 5223

Liebherr CNsfd 5223 User Manual - German - 26 pages

Liebherr CNsfd 5223 User Manual - Dutch - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info