715316

Liebherr CNfr 4335 Manual

26
Zoom out
Zoom in
Previous page
1/28
Next page
uChange the position of the appliance or the source of heat.
The internal light does not come on.
→The appliance is not switched on.
uSwitch the appliance on.
→The door was open for longer than 15 minutes.
uThe internal light switches itself off automatically after about
15 minutes if the door is open.
→The LED illumination is faulty or the cover is damaged:
WARNING
Risk of injury due to electric shock!
Live parts are located under the cover.
uHave the LED interior light changed or repaired only by the
customer service or by specialized personnel trained for the
purpose.
WARNING
Danger of injury by LED lamp!
The light intensity of the LED lighting corresponds to risk group
RG 2.
If the cover is defective:
uDo not look into the illumination with optical lenses from the
immediate proximity. This can cause injury to the eyes.
The door seal is defective or needs to be replaced for
another reason.
→The door seal can be replaced. It can be replaced without
the need for special tools.
uContact Customer Service (see 6 Maintenance) :
The unit has iced up or condensation has formed.
→The door seal may have also slipped out of its groove.
uCheck to ensure that the door seal is seated properly in the
groove.
8 Messages
Error messages and reminders are displayed by an
audible signal and a message on the screen. The
audible signal gets louder and louder when error
messages appear. It only stops when the message is
confirmed. Highest priority messages are displayed first
if several occur at the same time. Each message must
be cleared separately.
The message stays in the menu field as long as it is active or
the fault is not eliminated.
Note
Details on the message can be displayed again via the menu
field.
uPress menu.
uPress the message symbol.
uThe display switches to the next message when you press
one. After the last active message the display switches to
the home screen.
Door alarm
An audible warning sounds if the door is open for
longer than 60 seconds. The door alarm symbol
appears on the display. The audible warning stops
automatically when the door is closed.
The audible warning can be switched off when the
door is open. The audible alarm is switched off while
the door is open.
uPress the door alarm symbol.
wThe door alarm stops.
wThe display switches to the home screen.
uClose the door.
Temperature alarm
An audible signal sounds if the temperature is not cold
enough. The temperature alarm symbol appears on
the display.
The temperature had risen too high during the last few
hours or days. When the fault is eliminated the appli-
ance continues to work at the last temperature setting.
The reason for too high a temperature may be:
-hot, fresh food was inserted
-too much warm room air flowed in when rearranging and
removing food
-the power was cut off for a while
-the appliance is faulty
uOpen the door.
uPress the temperature alarm symbol.
wThe audible signal stops. The warmest temperature reached
during the malfunction is displayed on the screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
temperature alarm symbol appear in the relevant tempera-
ture field . In addition the messages symbol is
displayed in the menu field .
uCheck the food for quality. Do not consume spoiled food. Do
not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature is
reached.
If the alarm status persists or the temperature cannot be reset
independently:
(see 7 Malfunctions) .
Power cut
An audible warning sounds. The power cut symbol
appears on the display.
The temperature had risen too high over the last few
hours or days due to a power cut or power interrup-
tion. When the power is restored the appliance
continues to work at the last temperature setting. Acti-
vated reminders are retained.
uOpen the door.
uPress the power cut symbol.
wThe audible signal stops. The warmest temperature reached
in the freezer compartment during the power cut is displayed
on the screen.
uPress the screen or wait for 30 seconds.
wThe display switches to the home screen. Arrows and the
symbol temperature alarm appear in the relevant tempera-
ture field . The messages symbol is also shown in the
menu field .
uCheck the food for quality. Do not consume spoiled food. Do
not re-freeze defrosted food,
uClose the door.
wThe symbols are greyed out when the target temperature is
reached.
Appliance faults
An audible warning sounds. The appliance fault
symbol appears on the display with the relevant error
code.
An appliance component indicates a fault.
uOpen the door.
uNote down the fault code.
uPress the appliance fault symbol.
wThe audible signal stops. The display switches to the home
screen.
uClose the door.
uContact Customer Services (see 6 Maintenance) .
Messages
26 * Depending on model and options
… 26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CNfr 4335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CNfr 4335 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CNfr 4335

Liebherr CNfr 4335 User Manual - German - 28 pages

Liebherr CNfr 4335 User Manual - Dutch - 30 pages

Liebherr CNfr 4335 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info