715307
15
Zoom out
Zoom in
Previous page
1/28
Next page
Note
The manufacturer recommends:
uStore frozen produce at -18 °C or colder.
Connect and switch on appliance approx. 2 hours before
loading for the first time.
4.7.1 Switch on appliance
If the standby symbol is displayed over the whole screen:
uPress the standby symbol.
wThe appliance is switched on. The display switches to the
home screen.
wThe appliance is set to the displayed temperatures. This is
shown by down arrows.
If the standby symbol is displayed in the fridge compart-
ment and the freezer compartment fields:
uPress the Standby symbol in the freezer compartment field
or the fridge compartment field.
wThe appliance is switched on.
wThe appliance is set to the displayed temperatures. This is
shown by down arrows.
If the screen is black:
uTouch the screen.
wThe standby symbol appears on the whole screen.
uPress the standby symbol.
wThe appliance is switched on. The display switches to the
home screen.
wThe appliance is set to the displayed temperatures. This is
shown by down arrows.
4.7.2 Switching the fridge compartment on
The standby symbol is displayed in the fridge compartment
field.
uPress the standby symbol in the fridge compartment field.
wThe fridge compartment is switched on.
wThe fridge compartment is set to the displayed temperature.
This is shown by down arrows.
4.8 SmartDeviceBox
SmartDeviceBox: Start-up instruc-
tionswww.smartdevice.liebherr.com/install
If the SmartDevice box (SDB) is inserted correctly the menu
below appears. The device is supplied with WLAN activated.
To use more WiFi options,
open the WIFI menu.
Fig. 28
uPress WIFI.
wThe WIFI menu opens.
Turning on/off WiFi
Fig. 29
uUse the slider at the bottom right to turn on/off WIFI
wSlider to OFF = WIFIis disabled.
wSlider to ON = WIFIis enabled.
WIFI INFO
Call up the status of the
SmartDevice box.
Fig. 30
uPress the OK button.
wThe WIFI INFO screen opens.
wThe following statuses
can be displayed:
Fig. 31
wSSID: ***WPS*** = The SmartDevice box is in WPS mode
for 3 minutes. An automatic connection to the SmartDevice
box can be established via the router.
wSSID: LHSDB_xxxxxxxxx = the SmartDevice box is in
manual connection mode for 30 minutes. The SmartDe-
vice box transmits a private network to which you can
connect to send WLAN data.
wSSID: empty = The SmartDevice box is in sleep mode.
Please reset the WIFI and connect your SmartDevice box
to the home network.
wSSID: TP-LINK_2D43A2 or Fritz!Box7069 = The SmartDe-
vice box is connected to the home network.
WIFI RESET
Resetting the SmartDevice
box to the default settings.
Fig. 32
uConfirm with OK.
wThe SmartDevice box is reset to the default settings.
Showing the WiFi status on the Home screen
Status: WiFi on & connected
Fig. 33
uThe WiFi indicator is white.
wWiFi is on.
wThe home network and the Liebherr server are connected.
Status: WiFi on & connecting
uThe WiFi display shows
a clock.
Fig. 34
wWiFi is on.
wThere is no connection to the home network and/or the
Liebherr server.
Status: WiFi on & disconnected
Putting into operation
* Depending on model and options 15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CNef 4835 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CNef 4835 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CNef 4835

Liebherr CNef 4835 User Manual - German - 28 pages

Liebherr CNef 4835 User Manual - Dutch - 30 pages

Liebherr CNef 4835 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info