715306
24
Zoom out
Zoom in
Previous page
1/28
Next page
uClean drain hole: Remove deposits
with a narrow instrument, e.g. a
cotton bud.
uEmpty water collect tray: remove
water tank. Carefully unlatch tray
at front and then remove from
below.*
uClean the water container by
hand using lukewarm water and a
small amount of dish washing
liquid.*
uThe water container and cover
are dishwasher safe up to max.
60° * *
uMost of the parts can be dismantled for cleaning: see the
relevant chapter.
uClean drawers by hand with lukewarm water and a little
washing up liquid.
uAll the other fittings can be put in the dishwasher.
uOnly use a damp cloth to clean the telescopic rails. The
grease in the runners is for lubrication purposes and must
not be removed.*
Note
uClean water reservoir when not in use for more than 24 h.*
After cleaning:
uWipe dry the appliance and items of equipment.
uConnect the appliance and switch it on again.
uSwitch on SuperFrost (see 5.5.5 SuperFrost) .
When the temperature is sufficiently cold:
uPut the food back inside.
6.5 Cleaning the IceMaker*
The IceMaker drawer must be emptied and pushed in. The
IceMaker must be switched on.
uPress Menu.
uPress the navigation arrows until the IceMaker is
displayed.
uPress the IceMaker symbol.
uPress the navigation arrow until the cleaning posi-
tion is displayed.
uPress ON.
wThe ice cube tray moves to the cleaning position.
The screen cannot be used during this process.
wOFF appears: The rotary movement stops and the
IceMaker switches off for cleaning.
uRemove the drawer.
uClean the ice cube tray and drawer with a soft cleaning cloth
and warm water. If necessary use a mild detergent. Then
rinse out.
uPush the drawer in.
uPress OFF.
wThe ice cube tray moves to the operating position.
NOTICE
Rinse agent residue in the ice compartment and drawer.
Nausea or irritation of the mucous membrane.
uRemove rinse agent residue: Discard the first three batches
of ice cubes.
uLeave the IceMaker switched on.
-or-
uSwitch the IceMaker off (see 5 Control)
6.6 Customer service
First of all check whether you can eliminate the fault yourself.
(see 7 Malfunctions) If you can't, contact Customer Services.
You can find the address in the enclosed customer service list.
WARNING
Risk of injury if repair work is not carried out professionally!
uHave any repairs and action - not expressly specified - on
the appliance and mains cable carried out by service
personnel only. (see 6 Maintenance)
Call up the appliance name (model and index), service
no. (service), serial no. (s-no.) as well as the expanded
functions on the screen:
uPress menu.
uPress the navigation arrows until the appliance infor-
mation symbol is displayed.
uPress the appliance information symbol.
wThe appliance information is displayed.
uNote down the appliance
information.
uTo return to the home screen
press the Back symbol.
uTo access the customer menu, press it until the key symbol
appears.
uEnter the numerical code 151 to select the customer menu.
Customer menu
The following functions can be called up in the customer menu:
-Self diagnostics
The device carries out self diagnostics and checks all elec-
trical components.
-RESET
The appliance is reset to the factory settings.
-Manual defrosting
Manual defrosting is started.
-Water supply time*
This function is active for appliances with an ice cube maker.
The size of the ice cubes is determined by the water supply
time.*
uClose the door.
uContact customer service and give them the required appli-
ance information.
wThis will help us to provide you with a faster, more accurate
service.
uFollow any further instructions given by Customer Services.
Alternatively you can read off the appliance information
from the model plate:
Maintenance
24 * Depending on model and options
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CNef 4735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CNef 4735 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CNef 4735

Liebherr CNef 4735 User Manual - German - 28 pages

Liebherr CNef 4735 User Manual - Dutch - 30 pages

Liebherr CNef 4735 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info