710158
10
Zoom out
Zoom in
Previous page
1/28
Next page
4.3.4 Moving the central bearing parts to the
other side
Fig. 14
uRemove the washer.
Fig. 14 (1)
uRemove the screws with the T25 screwdriver.
Fig. 14 (2)
uRemove the cover carefully.
Fig. 14 (3)
uScrew the bearing bracket and the film rotated 180° firmly
onto the other side.
Fig. 14 (4)
uAttach the cover rotated 180° onto the other side.
Fig. 14 (5)
uPush the washer in from the front.
Fig. 14 (6)
4.3.5 Moving the lower bearing parts to the
other side
Fig. 15
uLift the bearing pin completely upward and remove.
Fig. 15 (1)
uUndo the screws with a T25 screwdriver and remove the
bearing bracket
Fig. 15 (2)
Fig. 16
uLoosen the screw using a T25 screwdriver.
Fig. 16 (1)
uLift the door closure aid and turn it 90° to the right in the
hole.
Fig. 16 (2)
uTighten the screw using a T25 screwdriver.
Fig. 16 (3)
Fig. 17
uRemove the cover and fix it on the other side.
Fig. 17 (1)
uPlace the bearing bracket on the other side and screw in
with the aid of a T25 screwdriver. Start with screw 2 at the
bottom in the middle.
Fig. 17 (2)
uScrew in screws 3 and 4.
Fig. 17 (3, 4)
uInsert the bearing pin completely. Make sure that the catch
mechanism is pointing to the rear.
Fig. 17 (5)
4.3.6 Moving the door bearing parts to the
other side
Bottom door
Putting into operation
10 * Depending on model and options
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CNef 4335-20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CNef 4335-20 in the language / languages: English as an attachment in your email.

The manual is 1.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CNef 4335-20

Liebherr CNef 4335-20 User Manual - German - 28 pages

Liebherr CNef 4335-20 User Manual - Dutch - 30 pages

Liebherr CNef 4335-20 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info