Manual Liebherr CN 4813-21 (page 6 of 11) (English)

710150

Zoom out

Zoom in

1/11

5 Control

5.1 Child proong

The child-proong function enables you to make sure that the

appliance is not inadvertently switched o by playing children.

5.1.1 Setting the child lock

To switch on the function:

u Activate the setting mode: Press SuperFrost button Fig. 12 (7)

for approx. 5 seconds.

 The menu symbol Fig. 12 (13) is shown on the display.

 S ashes on the display.

u Using the adjustment button for the freezer section Fig. 12 (6)

select c.

u Briey conrm with the SuperFrost button Fig. 12 (7).

 c1 appears on the display.

u Briey conrm with the SuperFrost button Fig. 12 (7).

 The child lock symbol Fig. 12 (14) lights up on the display.

 c ashes on the display.

 The child lock function is switched on.

To cancel setting mode:

u Briey press the On/O button for the freezer section Fig. 12 (9).

-or-

u wait 5 min.

 The temperature display shows the temperature again.

To switch o the function:

u Activate the setting mode: Press SuperFrost button Fig. 12 (7)

for approx. 5 seconds.

 The menu symbol Fig. 12 (13) is shown on the display.

 c ashes on the display.

u Briey conrm with the SuperFrost button Fig. 12 (7).

 c0 appears on the display.

u The child lock symbol Fig. 12 (14) goes out.

 c ashes on the display.

 The child lock function is switched o.

To cancel setting mode:

u Briey press the On/O button for the freezer section Fig. 12 (9).

-or-

u Wait 5 min.

 The temperature display shows the temperature again.

5.2 Door alarm

For the fridge and freezer compartments

An audible warning sounds if the door is open for longer

than 60 seconds.

The audible warning stops automatically when the door is closed.

5.2.1 Muting the door alarm

The audible alarm can be muted when the door is open. The

sound switch-o function is active as long as the door is left open.

u Press alarm button Fig. 12 (8).

5.3 Temperature alarm

The audible alarm sounds if the freezer temperature is

not cold enough.

The temperature display and the alarm symbol ash at

the same time.

The cause of the temperature being too high may be:

- warm fresh food was placed inside

- too much warm ambient air owed in when rearranging and

removing food

- power failure for some time

- the appliance is faulty

The audible alarm is automatically silenced and the alarm symbol

goes out when the temperature is suciently cold again.

If the alarm state persists: (See Malfunction).

Note

Food may be spoilt if the temperature is not cold enough.

u Check the quality of the food. Do not consume spoiled food.

5.3.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is

suciently cold again, the alarm function is active again.

u Press alarm button Fig. 12 (8).

 The audible alarm is silenced.

5.4 Sabbath Mode

This function meets the religious requirements on the Sab-

bath or Jewish feast days. When Sabbath mode is on some

of the electronic control functions are switched o. After setting

Sabbath mode you no longer need to worry about indicator

lamps, gures, symbols, displays, alarm messages and fans. The

thawing cycle only works for the specied time without

taking account of fridge use. After a power cut the appliance

automatically switches back to Sabbath mode.

There is a list of Star-K certied appliances at www.star-k.org/

appliances.

WARNING

Danger of food poisoning.

If a power cut occurs when Sabbath mode is enabled, this

message is not saved. Once the power is restored the appliance

continues to work in Sabbath mode. When this mode is over no

message about the power cut is displayed on the temperature

display. If a power cut occurred during Sabbath mode:

u Check the food for quality. Do not eat the food if it has thawed.

- All functions are blocked until Sabbath Mode is switched o.

- If functions such as SuperFrost, SuperCool, ventilation etc.

are selected when Sabbath mode is switched on, they remain

switched on.

- No audible signals are emitted and the temperature display

does not indicate any warnings or settings (such as a

temperature alarm or door alarm).

- The internal light is o.

5.4.1 Setting Sabbath Mode

u Activate the setting mode: Press SuperFrost button Fig. 12 (7)

for approx. 5 seconds.

 S ashes on the display.

 The menu symbol Fig. 12 (13) lights up.

u In order to call up the Sabbath Mode function: Press

SuperFrost button Fig. 12 (7) briey.

If S1 appears on the display:

u To switch on Sabbath Mode, press the SuperFrost button

Fig. 12 (7) briey.

u To switch o Sabbath Mode, press the SuperFrost button

Fig. 12 (7) briey.

If S0 appears on the display:

u Briey conrm with the SuperFrost button Fig. 12 (7).

u Deactivate the setting mode: Press On/O button for the

freezer section Fig. 12 (9).

* according to model and design

Control

4.7.1 Switching on the freezer compartment

u Press On/O button for the freezer section Fig. 12 (9).

 The appliance is switched on. The temperature display shows

the set temperature. The temperature display for the freezer

section and the alarm symbol ash until the temperature is

cold enough.

4.7.2 Switching on the refrigerator compartment

Note

u When the refrigerator compartment is switched on, the freezer

compartment is automatically switched on as well.

If the efrigerator compartment was switched o (e.g. with an

extended absence due to holiday), this can be switched on again

separately.

Press On/O button for the fridge section Fig. 12 (1).

 The interior light comes on when the door is open.

 The temperature displays light up. Refrigerator compartment

and freezer compartment are switched on.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CN 4813-21 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CN 4813-21

Liebherr CN 4813-21 User Manual - German - 10 pages

Liebherr CN 4813-21 User Manual - Dutch - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr CN 4813-21 Manual

Product: