805301
9
Zoom out
Zoom in
Previous page
1/9
Next page
17
Malfunctions
Your appliance is designed and manufactured for a lengthy, reliable
operating life with no malfunctions. If a malfunction nonetheless
occurs during operation, check whether it is due to an operating
error. Please note that even during the warranty period the result-
ant servicing costs in this case will have to be borne by the owner.
You may be able to rectify the following faults yourself:
Appliance does not function: the control lamps are not lit.
- Is the plug correctly fitted in the mains socket?
- Is the fuse intact?
Loud running noise:
- Is the appliance set up firmly on the floor?
- Does the appliance cause nearby items of furniture or objects
to vibrate? Please note that noises caused by the refrigerant
circuit cannot be avoided.
The temperature is not low enough:
- Is the temperature setting correct (see Setting the temperature)?
- Have excessive amounts of fresh food been placed in the appli-
ance? Observe the temperature display for a further 24 hours.
- Does the separately installed thermometer show the correct
reading?
- Is the ventilation system working properly?
- Is the appliance set up too close to a heat source?
If F4 or F5 appears in the display, the appliance has suffered
a fault. In this case, contact the customer service department.
If none of the above causes
apply and you cannot rectify
the fault yourself, contact the
nearest customer service
department stating the type of
appliance
, service number
and appliance number
ƒas
indicated on the type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.
Shutting your appliance down
If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the lid open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations
and EU Directives 2014/30/EU, 2014/35/EU, 2009/125/EG and
2011/65/EU.
EN
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CFd 2085 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CFd 2085 in the language / languages: English as an attachment in your email.

The manual is 2.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CFd 2085

Liebherr CFd 2085 User Manual - German - 9 pages

Liebherr CFd 2085 User Manual - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info