Manual Liebherr CBNstc 579i (page 30 of 36) (English)

804797

Zoom out

Zoom in

1/36

uInsert the axles Fig. 83 (1) on the EasyTwist-Ice in the

guides and push the rear side Fig. 83 (2) until the lug

engages.

uPush in the EasyTwist-Ice drawer.

WARNING

Risk of poisoning due to contaminated water!

uFill the water tank with potable water only.

uFill the water tank and insert it. (see 7.11.1 Filling the

water tank)

With unfiltered water:

uDispose of ice cubes that were produced within 24 hours

of the first ice cube production.

With filtered water:

uDispose of ice cubes that were produced within 48 hours

of the first ice cube production.

8.6.7 Cleaning the IceMaker*

There are various options for cleaning the IceMaker.

We recommend cleaning in the following situations:

qInitial commissioning

qIf out of use for longer than 5 days.*

Make sure that the following requirements are met:

qIceMaker drawer is emptied.

qIceMaker drawer is fully inserted.

qThe IceMaker has been activated. (see 6.2 Operating

logic)

On first use or if not used for prolonged periods

Clean the IceMaker with TubeClean.

uPut an empty 1.5 l vessel (max. height 10 cm) in the

drawer under the IceMaker.

uActivate the TubeClean function. (see 6.2 Operating logic)

wThe rinse process is prepared (max. 60 min.): The symbol

flashes.

wWater pipes are rinsed: Symbol flashes.

wRinsing process is complete: Function turns off automati‐

cally.

uTake out the IceMaker drawer and remove the container.

uClean the IceMaker drawer with warm water and a little

detergent.

uPush in the IceMaker drawer.

wIce cube production starts automatically.

Without water filter*

uDispose of any ice cubes that are produced within 24

hours of the first ice cube production.*

With water filter:*

uDispose of any ice cubes that are produced within 48

hours of the first ice cube production.*

-or-

uDraw 2 l of water from the InfinitySpring and dispose of

it.*

When cleaning is required

Clean the IceMaker manually.

uRemove the IceMaker drawer and clean with warm water

and a little detergent.

uPush in the IceMaker drawer.

wIce cube production starts automatically.

8.6.8 After cleaning

uWipe dry the appliance and items of equipment

uConnect and switch on the appliance.

uActivate SuperFrost (see 6.3 Functions) .

When the temperature is sufficiently cold

uPlace the food inside.

uRepeat cleaning regularly.

9 Customer support

9.1 Technical specifications

Temperature zone

Cool: 3 °C to 9 °C

BioFresh 0 °C to 3 °C

BioFresh Profes‐

sional*

(Fish & SeaFood)*

-2 °C to 0 °C*

Possible settings (see Fish &

Seafood-Safe *) :*

0 °C | 0 °C*

-2 °C | 0 °C*

-2 °C | -2 °C*

Freezing -26 °C to -15 °C

Maximum freezing quantity/24 h

Freezer See “Freezing capacity …/24 h” on

the type plate

Max. equipment capacity

Equipment Appliance

width

550 mm

(see instal‐

lation

instruc‐

tions,

appliance

dimen‐

sions)

Appliance

width

600 mm

(see

installa‐

tion

instruc‐

tions,

appliance

dimen‐

sions)

Appliance

width

700 mm

(see instal‐

lation

instruc‐

tions, appli‐

ance

dimen‐

sions)

Partial pull-out

freezer compart‐

ment*

(see 7.6.1 Drawer

on telescopic rails)

12 kg* 15 kg* --*

Ice cube production with IceMaker*

Ice cube produc‐

tion/24 h

At a temperature of -18 °C: 1.2 kg of

ice cubes

Maximum ice cube

production/24 h

When the MaxIce function is active:

1.5 kg of ice cubes

Ice cube production with EasyTwist-Ice*

Time required at -18 °C approx. 5.5 h

Time required with SuperFrost activated approx. 3 h

Time required to reach various temperatures with Vario‐

Temp

Initial tempera‐

ture

Target tempera‐

ture

Time required to

reach target temper‐

ature

-18 °C 0 °C >8 h

-18 °C 8 °C >12 h

8 °C 14 °C >6 h

14 °C -18 °C >4 h

Customer support

30 * Depending on model and options

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNstc 579i in the language / languages: English as an attachment in your email.

The manual is 7.43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNstc 579i

Liebherr CBNstc 579i User Manual - German - 36 pages

Liebherr CBNstc 579i User Manual - Dutch - 36 pages

Liebherr CBNstc 579i User Manual - French - 38 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr CBNstc 579i Manual

Product: