804796
8
Zoom out
Zoom in
Previous page
1/26
Next page
5 Energy saving
-Always ensure good ventilation. Do not obstruct ventila‐
tion openings or grilles.
-Never block air slits in the fan.
-Do not install the appliance in direct sunlight or next to a
stove, heater or similar heat source.
-Energy consumption depends on installation conditions
such as the ambient temperature (see 1.3 Range of appli‐
ance use) . A warmer ambient temperature can increase
the energy consumption.
-Avoid opening the appliance door for any longer then
necessary
-The lower the temperature is set the higher the energy
consumption.
-Sort your food items: home.liebherr.com/food.
-All food stored in the appliance should be well wrapped
and covered. This prevents frost buildup.
-Only take food out for as long as necessary so that it
does not get too warm.
-Insertion of warm foods: first let the food cool down to
room temperature.
-Defrost frozen food in the fridge
-For longer periods of absence, use HolidayMode (see
HolidayMode) .
6 Use
6.1 Controls and displays
The display provides a quick overview of the temperature
setting and the status of functions and settings. You can
control the functions and settings either by deactivating/
activating them or by selecting a value.
6.1.1 Status display
Fig. 4
(1) Fridge compartment
temperature display
(2) Freezer compartment
temperature display
The Status display shows the set temperatures and is the
home display. From there, you can navigate to the options
and settings.
6.1.2 Navigation
Navigate in the menu to access the individual functions. An
audible signal sounds after confirming a function or setting.
If no selection is made after 10 seconds the display
switches to the Status display.
The appliance is operated with the buttons next to the
display.
Fig. 5
(1) Left/right navigation
arrow
(2) Confirm
Left/right navigation arrow Fig. 5 (1):
-Navigating in the menu. After the last menu page, it goes
back to the first one.
Confirm Fig. 5 (2):
-Activating/deactivating a function.
-Opening a submenu.
-Confirming a selection. After confirmation the display
switches back to the menu.
Back to the Status display: in the fastest possible manner:
-Close and open the door.
-or wait 10 seconds. The display changes to the Status
display.
6.1.3 Operating structure
The controls are explained by a template. The display
changes depending on the function or settings.
Menu without submenu
Fig. 6
(1) Status deactivated /
status activated white
bar in the top area
(3) Menu: Function name or
menu: Setting name
(2) Symbol or selected
value
Menu with submenu
Fig. 7
(1) Menu: Function name
or menu: Setting name
(3) Symbol or selected value
(2) Status (4) Submenu: Function name
or submenu: Setting
name
(2) Off / On
You can navigate as follows:
-Navigate with the left/right navigation arrow Fig. 5 (1).
-Press Confirm Fig. 5 (2) to go to the submenu Fig. 7 (4).
Navigate with the left/right navigation arrow Fig. 5 (1).
Energy saving
8 * Depending on model and options
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNsfd 5723 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNsfd 5723 in the language / languages: English as an attachment in your email.

The manual is 6.25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNsfd 5723

Liebherr CBNsfd 5723 User Manual - German - 26 pages

Liebherr CBNsfd 5723 User Manual - Dutch - 26 pages

Liebherr CBNsfd 5723 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info