804790
20
Zoom out
Zoom in
Previous page
1/30
Next page
7.7.2 Inserting the compartment cover
Fig. 40
If the text THIS SIDE UP points upwards:
uInsert the lip of the cover over the opening of the rear
bracket Fig. 40 (1) and click into place Fig. 40 (2).
uPosition the cover where you want it (see 7.8 Adjusting
the moisture levels) .
7.8 Adjusting the moisture levels
You can adjust the moisture in the drawer yourself by
adjusting the compartment cover.
The compartment lid is attached to the drawer and can be
hidden by a shelf or additional drawers.
Fig. 41
Low air humidity
uOpen the drawer.
uSlide the compartment cover forwards.
wWith the drawer closed: Gap between the cover and the
compartment.
uSwitch off HydroBreeze.*
wThe air moisture in the Safe decreases.
High air moisture
uOpen the drawer.
uSlide the cover back.
wWith the drawer closed: The cover seals the compart
ment.
uActivate the HydroBreeze.*
wThe air moisture in the Safe increases.
If there is too much moisture in the compartment:
uChoose the setting “low air moisture.
-or-
uRemove any excess moisture with a cloth.
Note
You can apply the “low air moisture setting to the Fruit &
Vegetable-Safe and the Meat & Dairy-Safe.
uSet the “low air moisture option.
7.9 HydroBreeze*
HydroBreeze emits a mist over the refrigerated goods to
provide moisture every time the door is opened.
The HydroBreeze and its water tank are located in the
adjustable bottle shelf.
Ensure that the following conditions are met:
-The water tank is clean (see 8.4.4 Clean the compo
nents) .
-The water tank is properly engaged.
-Moisture is set to “high moisture (see 7.8 Adjusting the
moisture levels) .
-HydroBreeze is on (see HydroBreeze*) .
7.9.1 Fill the water tank
WARNING
Unclean water!
Contaminants.
uOnly fill with drinking water.
uThe HydroBreeze is off: empty water tank.
uThe HydroBreeze is no longer in use: empty water tank.
NOTICE
Sugar-content liquids!
Damage to HydroBreeze.
uOnly fill with drinking water.
Note
Only use filtered, decarbonised water for the best quality
drinking water and to make the HydroBreeze, work
smoothly.
This water quality can be achieved using a table water filter
of the kind available in trade retail outlets.
uOnly ever fill the water tank with filtered, decarbonised
drinking water.
The water tank is built into the adjustable bottle shelf
(see 1.2 Overview of the appliance and equipment) .
Fig. 42
uPress on the back-left corner of the front glass plate.
wThe glass panel folds up at the front.
uLift the glass panel and fold towards the rear until it
clicks into place Fig. 42 (1).
wGlass panel stands upright.
uSlide the slider Fig. 42 (2) to the left.
wThe water tank jumps out of its recess.
uRemove the water tank Fig. 42 (3).
uCleaning the water tank (see 8.4.4 Clean the compo
nents) .
Square opening:
uFill with drinking water up to the marker.
uInsert the water tank into the recess, bottom first.
uSlowly lower the front part and push the tank in.
wThe water tank is clicked into place.
7.9.2 Dismantling the water tank
You can take the water tank apart for cleaning.
Features
20 * Depending on model and options
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNsda 5753 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNsda 5753 in the language / languages: English as an attachment in your email.

The manual is 6.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNsda 5753

Liebherr CBNsda 5753 User Manual - German - 32 pages

Liebherr CBNsda 5753 User Manual - Dutch - 32 pages

Liebherr CBNsda 5753 User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info