Manual Liebherr CBNPes 5167 PremiumPlus (page 12 of 15) (English)

597392

Zoom out

Zoom in

1/15

Malfunctions

You may be able to rectify the following faults by checking

the possible causes yourself:

• Appliance does not function:

– Is the appliance switched on?

– Is the plug correctly fitted in the mains socket?

– Is the fuse intact?

• Loud running noise:

– Is the appliance set up firmly on the floor?

– Does the appliance cause nearby items of furniture or objects to

vibrate? Please note that noises caused by the refrigerant circuit

cannot be avoided.

• The temperature is not low enough:

– Is the temperature setting correct (see "Setting the temperature")?

– Have excessive amounts of fresh food been placed in the appli-

ance?

– Does the separately installed thermometer show the correct read-

ing?

– Is the ventilation system working properly?

– Is the appliance set up too close to a heat source?

If none of the above causes

apply and you cannot rectify

the fault yourself, contact the

nearest customer service de-

partment stating the type des-

ignation

1, service number 2

and appliance number

3 as

indicated on the type plate. The

type plate is located inside the

appliance on the left-hand side.

Installing appliance in a row of kitchen units

To adapt the height of the appliance to the surrounding furniture

a top unit

1 can be added.

A gap of at least 50 mm

depth must be provided

behind and along the entire

width of this unit so as to

ensure sucient ventila-

tion. The area of ventila-

tion underneath the ceiling

should be at least 300 cm

When setting up the ap-

pliance next to a wall

4, a

distance of approx. 50 mm

must be provided on the

hinge side between the

appliance and the wall (for

the handle when the door

is open).

1 top unit

2 refrigerator-freezer

3 kitchen unit side panel

4 wall

Changing over door hinges

Door hinges should only be changed by a trained expert.

Changing the door hinges must be done by two people.

Caution! Before changing over door hinges,

disconnect the appliance from the mains.

1. Open top door, prise o

door cover and pivot to the

left.

Top right

2. Let door cover hang down.

3. Slide red safety bracket over

the hinge.

4. Pull the left-hand side of the

cover approx. 5 mm towards

you.

5. Remove pin.

6. Open top door wide and

remove covers.

7. Prise o covers on the left

and in the centre.

Top right

8. Disconnect the connector and

pull the cable out of the guide.

9. Remove cover from upper door

mounting and unscrew door.

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch

it o and disconnect the plug or switch o or unscrew the fuse.

Clean the appliance and leave the door open in order to prevent

unpleasant smells.

The appliance complies with the relevant safety regulations and

EC Directives 2004/108/EC and 2006/95/EC.

All types and models are subject to continuous improvement and

the manufacturer therefore reserves the right to make modica tions

to the shape, equipment and technology.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNPes 5167 PremiumPlus in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNPes 5167 PremiumPlus

Liebherr CBNPes 5167 PremiumPlus User Manual - German - 15 pages

Liebherr CBNPes 5167 PremiumPlus User Manual - Dutch - 15 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Liebherr CBNPes 5167 PremiumPlus Manual

Product: