597392
9
Zoom out
Zoom in
Previous page
1/15
Next page
23
GB
LIGHTING
Setting the display brightness
Activate the MAIN MENU.
Activate the ADDITIONAL FUNC-
TIONS menu.
Activate the CONFIGURATION menu.
Place the cursor on LIGHTING. Press
button .
Place the cursor on SETTING. Press
button .
Use buttons or to set the brightness
between level 1 and 5.
1 = display dark
5 = display bright
Press button .
LANGUAGE
Setting the language
Activate the MAIN MENU.
Activate the ADDITIONAL FUNC-
TIONS menu.
Activate the CONFIGURATION menu.
Place the cursor on LANGUAGE.
Press button .
The choice of languages will appear in
the display.
Use buttons or to select the desired
language.
Press button .
All menus will now appear in the set
language.
CONTRAST
In this option, the contrast between the writing and background
can be adjusted.
Activate the MAIN MENU.
Activate the ADDITIONAL FUNC-
TIONS menu.
Activate the CONFIGURATION menu.
Place the cursor on CONTRAST. Press
button .
Place the cursor on SETTING. Press
button .
Use buttons and to set the contrast
between level 1 and 10.
1 = low contrast
10 = high contrast
Press button .
ALARM FUNCTIONS
The electronic control system is equipped with alarm functions,
which are activated if excessive temperatures or malfunctions occur.
Alarm > Freezer temperature too high
If the temperature in the freezer is too high, this will be shown in the
display and the audible warning signal will sound.
Press button to cancel the alarm. The
display will switch back to the tempera-
ture display.
The relative alarm is shown in the
display:
> Temperature too high
> Power failure
This can be caused by:
the appliance door being left open for
a long time, allowing warm ambient air
to enter;
a long power failure;
a fault in the appliance.
In each case, make sure food has not thawed or perished. If the
alarm state lasts, contact the customer service department (see
section on Malfunctions).
Alarm > Appliance door open
If an appliance door is left open for more
than 60 seconds, the message PLEASE
CLOSE THE DOOR will be shown in
the display (for REFRIGERATOR or
FREEZER respectively). The audible
warning signal sounds.
Press button to cancel the alarm.
If the door is closed, the normal tem-
perature display appears in the display.
Alarm > Icemaker
If a malfunction occurs in the ice maker, the respective alarm is
shown in the display.
> CHECK THE WATER SUPPLY
> ICE CUBE TRAY CANNOT BE EMPTIED
> SENSOR FAULT
> MECHANICAL FAULT
The audible warning signal sounds.
Press button to cancel the alarm. The display switches back to
the temperature display. ICEMAKER FAULT is shown in the display.
Check whether there is an operating error (see section on Malfunc-
tions in the separately enclosed Ice maker operating instructions).
If you are unable to rectify the fault yourself, contact your customer
service department.
Alarm > F1 to F5
If F1 to F5 appears in the display, the appliance has a fault.
In this case, contact the customer service department (see section
on Malfunctions).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNPes 5167 PremiumPlus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNPes 5167 PremiumPlus in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNPes 5167 PremiumPlus

Liebherr CBNPes 5167 PremiumPlus User Manual - German - 15 pages

Liebherr CBNPes 5167 PremiumPlus User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info