597388

Liebherr CBNPes 3967 PremiumPlus Manual

11
Zoom out
Zoom in
Previous page
1/26
Next page
u
On the upper door, rotate the turn hinge
Fig. 20 (23)
outwards, parallel to the edge of the door.
Fig. 21
NOTICE
Cables may be twisted and damaged as a result!
u
Use the template.
u
Detach the supplied template
Fig. 21 (61)
from the turn
hinge and use it to prevent the turn hinge
Fig. 21 (23)
and
bush from turning.
u
Using a screwdriver, push out the turn
hinge
Fig. 20 (23)
from underneath and
remove it from the door, complete with
cable.
u
Using a screwdriver, push out the stopper
Fig. 20 (62)
from underneath and transfer it
to the opposite side.
u
Thread in the cable of the turn hinge
Fig. 20 (23)
on the
opposite side and insert the turn hinge.
u
Detach the template
Fig. 20 (61)
and secure it in the turn
hinge.
u
Plug in the connector
Fig. 20 (60)
.
u
Lay the cable in the guide.
Appliances without soft stop mechanism:
u
Snap the cover
Fig. 20 (63)
into place on the door.
4.3.13 Fitting the upper door
u
Place the upper door on the middle bearing pin
Fig. 13 (41)
,
close the door and attach the upper turn hinge
Fig. 10 (23)
so that it engages in the upper side of the appliance.
u
Screw theturn hinge
Fig. 10 (23)
firmly into place (with
4 Nm). Possibly make preliminary holes with a bradawl or
use a cordless screwdriver.
u
Snap cover
Fig. 10 (20)
and cover
Fig. 10 (21)
into place.
u
Plug in the connector
Fig. 8 (12)
again.
u
Lay the cable in the guide.
u
Attach the cover
Fig. 8 (10)
again.
Appliances without soft stop mechanism:
u
Turn the cover
Fig. 9 (6)
through 180°, attach it from the
outside to the handle side and snap it into place.
u
Turn the cover
Fig. 9 (11)
through 180°, attach it from the
outside to the handle side and snap it into place.
Appliances with soft stop mechanism:
u
Leave the door open.
4.3.14 Fitting the upper soft stop mechanism*
For appliances with soft stop mechanism.
For appliances without soft stop mechanism proceed with
item (see 4.3.15) .
Fig. 22
u
Remove the cover
Fig. 22 (9)
from the faceplate
Fig. 22 (1)
and re-insert it at the other side.
u
Engage the upper soft stop unit with the joint on the hinge
side (A) and swivel into place (B).
w
The screw holes at the left and right have to register.
u
Screw the soft stop unit firmly into place. (2x Torx® 15)
Fig. 22 (7)
Note
u
Keep to the correct order. First attach the panel over the soft
stop bracket, then the cover.
Fig. 23
u
Attach the faceplate
Fig. 23 (1)
to the soft stop bracket
Fig. 23 (4)
so that the catches face inwards and the front
faces the appliance.
u
Slide on the cover
Fig. 23 (5)
from the outside (A) and swivel
it over the bearing element
Fig. 23 (8)
(B).
u
Attach the cover
Fig. 23 (5)
and engage it as far as the first
detent.
w
The openings for the pin are on top of one another after the
soft stop bracket has been positioned.
u
Draw the soft stop bracket
Fig. 23 (4)
to the bearing element
Fig. 23 (8)
and insert the pin
Fig. 23 (4)
from above so that
the square is seated in the depression.
u
Now completely snap the cover
Fig. 23 (5)
onto the bearing
element
Fig. 23 (8)
.
w
Pay attention that the cover fits properly so that the door
closes properly and the pin is secured.
u
Twist the safety lock
Fig. 23 (2)
for removal.
u
Snap thefaceplate
Fig. 23 (1)
onto the door.
u
Turn the cover
Fig. 6 (6)
through 180°, attach and engage it
on the handle side.
4.3.15 Aligning the doors
u
Possibly align the door to the appliance housing by way of
the two slots in the lower turn hinge
Fig. 15 (55)
and middle
turn hinge
Fig. 13 (42)
. To do so, unscrew the middle screw
in the bottom turn hinge
Fig. 15 (55)
.
Putting into operation
* Depending on model and options 11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Liebherr CBNPes 3967 PremiumPlus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Liebherr CBNPes 3967 PremiumPlus in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Liebherr CBNPes 3967 PremiumPlus

Liebherr CBNPes 3967 PremiumPlus User Manual - German - 26 pages

Liebherr CBNPes 3967 PremiumPlus User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info